Macrosso Posted October 23, 2003 Posted October 23, 2003 help i dont understand once u take the cover off then what put screws back on and ? im lost plz help Quote
VF-19 Posted October 23, 2003 Posted October 23, 2003 Too vague... need more info. Exactly what are you trying to do? What is a slide card? Etc... Quote
jwinges Posted October 23, 2003 Posted October 23, 2003 ok... Eject tray Turn power switch off Turn ps2 up-side-down Remove screw toward the front right of tray as you view it now. Get a sewing needle or tiny screw driver (the kind you use for glasses. Right under where the screw was there is a little tab...wedge the needle in there and spread the tab a tiny bit. Slowly pull out the right side of tray front as you view it now Left side will offer resistence but should come out without having to spread tab Replace screw to where it was previosly located (it holds some sort of pushrod in place) Installation is complete. ..turn over PS2 and insert appropriate slide disk) Slide card insructions. insert card with hook to the right. Imagine a backward 7 as far as the orientation goes. Insert slide card about 2cm to the right of the left side of the tray opening (it goes under the tray. It should go all the way in until it hits the thicker portion of the slide card against PS2 Now slide the card all the way to the right. There will be some resistence, and the tray will pop out a little using card pull the tray out using the card. Place import in tray. Manually close tray by pushing it in on the left side of the tray. It will catch once or twice on the way in. Insert slide card again and move it again all the way to the right... Tray should pop out again...Now keep card there and move it all the way to the left. Press X Play game Hope that helps. Quote
Gaijin Posted October 23, 2003 Posted October 23, 2003 Isn't this in the other thread? ....Threads. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.