misterryno Posted February 26, 2008 Author Share Posted February 26, 2008 I am stoked that I will be able to make a nice small and relatively inexpensive Milia colored red GBP set! That's a cool idea. I wanna see it when it's done of course . Quote Link to comment Share on other sites More sharing options...
protostar8 Posted February 29, 2008 Share Posted February 29, 2008 (edited) Seriously, out of all the people on these forums that "know people", isn't there anyone that can get the lowdown on these from Toynami? Just bought a wave 2 Max, so I need that Blue Armor dangit! Edited February 29, 2008 by protostar8 Quote Link to comment Share on other sites More sharing options...
jenius Posted February 29, 2008 Share Posted February 29, 2008 It'd be useless anyway, Toynami never sticks to what they tell magazines or people at the various conventions so what would make them tell anyone else something more truthful. I'm sure if you were able to ask George Sohn right now he'd say "Oh, very soon!" and then you could begin the holding your breath game. Quote Link to comment Share on other sites More sharing options...
Vifam7 Posted February 29, 2008 Share Posted February 29, 2008 (edited) it could just be a isolated incident? its the VF-1S hikaru which was the 1st 1/100 valk released. perhaps they fixed the latter releases, but i don't know since i didn't bother picking up ther others after handling the 1S hikaru. don't get me worng, it still holds together, it doesn't fall apart with the slightest breeze or anything, its just that most of the pegs inserts are cracked/split with very minimal handling on my part. I'm a little late to this discussion but I recently got the 3 Series 2 releases (Max, Miriya, Hikaru). I too experienced cracked/split peg inserts. The arms dropped off during my first transformation of Miriya's VF to fighter mode. And I was doing everything gently. I was like WTF!? Then I saw the cracked pegs. So it's not an isolated incident or limited to the 1st series. I think the cracks happened when I tried to connect the arms to the legs in fighter mode. This makes the fighter mode nicely rigid but (I believe) due to a inherent design flaw, the arm peg doesn't allow for a slight amount of flexing needed and thus cracks. Like 'do not disturb' wrote above, the toy doesn't fall apart BUT it does have issues. And to nitpick, the sculpt isn't that great. The forward fuselage looks too short in fighter mode (though I suppose that makes it look better in battloid mode - but I'm a fighter mode guy) and the tail fins are way too small. The photos make it look better than it does in reality. That seems to be the case with all Toynami products (IMO). Edited February 29, 2008 by Vifam7 Quote Link to comment Share on other sites More sharing options...
Alpha OTS Posted March 4, 2008 Share Posted March 4, 2008 Posted this in a picture thread on another board, but thought it might fit here too. Quote Link to comment Share on other sites More sharing options...
Wicked Ace Posted March 4, 2008 Share Posted March 4, 2008 (edited) The design looks good. Just take that mold of those in that picture and start pumpin em out. Lets get those Booby Ducks out while their at it. That's what I'm talkin about Yeah, I need a fast pack set for Millia (2045). edit: Thanks to Macross Mecha Manual for the color illustrations. Edited March 4, 2008 by Wicked Ace Quote Link to comment Share on other sites More sharing options...
dizman Posted March 4, 2008 Share Posted March 4, 2008 Hey nice custom WA! That GPB looks pretty good, I might just pick up a set. Is it confirmed that the CF is coming with super/strike pack parts or is it a lone release? Quote Link to comment Share on other sites More sharing options...
jodokast Posted March 4, 2008 Share Posted March 4, 2008 I'll second that. W.A. you should take more photos of it and post it to the "missing customs" link. Quote Link to comment Share on other sites More sharing options...
Wicked Ace Posted March 4, 2008 Share Posted March 4, 2008 (edited) Thanks for the kind words, but this one is no big deal. For this one, one needs to gather up all his/her artistic talents and set them aside, as they won't be needed. All one needs to make this are the items in the pic. In case anyone is wondering where the shiny Sharpie streaks are, the flat clear coat makes them disappear. Optional supplies for the boxing gloves: edit: One can substitute any beer or alcoholic beverage of one's choosing. Or, although I can't imagine doing so, one can skip the alcohol. Edited March 4, 2008 by Wicked Ace Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 4, 2008 Author Share Posted March 4, 2008 (edited) edit: One can substitute any beer or alcoholic beverage of one's choosing. Or, although I can't imagine doing so, one can skip the alcohol. Is the Spray can there the sealent you use??? Also...I like to drink beer while on the "customing job"...it's usually something darker though. I can't do the ML. EDIT----> BTW.....GREAT JOB on this one!!! Edited March 4, 2008 by misterryno Quote Link to comment Share on other sites More sharing options...
Ginrai Posted March 4, 2008 Share Posted March 4, 2008 I guess in this case, since I bought the supposed VF-1S exclusive as well, then they re-release it with a similar paint scheme means I've been Toynamied too!!! Frack. :angry: Oh yeah, because Yamato's never done that. They never released a1/60 brown Valkyrie that was exclusive to Toys "R" Us and then did a general release with a slightly different shade of brown. No, that never happened, did it? I guess Yamato customers have been "Toynamied". Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 4, 2008 Author Share Posted March 4, 2008 I guess Yamato customers have been "Toynamied". No.....they've been "Yamatoed" LMAO Quote Link to comment Share on other sites More sharing options...
miriya Posted March 4, 2008 Share Posted March 4, 2008 I like beer and I like wine but I can not drink them in the same night. It is a chemical reaction for me that is very unpleasant. Anyway, cool little custom job Wicked Ace! Quote Link to comment Share on other sites More sharing options...
Fly4victory Posted March 4, 2008 Share Posted March 4, 2008 What a GPB.... Make one of your own. The problem is the Toynami's are not exactly 1/100. This is a custom that may never be finished. Quote Link to comment Share on other sites More sharing options...
miriya Posted March 4, 2008 Share Posted March 4, 2008 What a GPB.... Make one of your own. The problem is the Toynami's are not exactly 1/100. This is a custom that may never be finished. ooooohhhhh. Cool. Where are those parts from? Quote Link to comment Share on other sites More sharing options...
Fly4victory Posted March 5, 2008 Share Posted March 5, 2008 IMAI 1/100 Armored Valkyrie Kit Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 5, 2008 Author Share Posted March 5, 2008 IMAI 1/100 Armored Valkyrie Kit SOOOOOOO COOL!!!! There ya go Miriya......now you can make your custom Miriya GBP Armor. Quote Link to comment Share on other sites More sharing options...
miriya Posted March 5, 2008 Share Posted March 5, 2008 SOOOOOOO COOL!!!! There ya go Miriya......now you can make your custom Miriya GBP Armor. Good point. I will still have to get the kits though. Since I am such a lazy sombiach I will probably wait until the toynami parts come out and put on a toynami milia. I really am spread out with my time and have a few projects already that I am way behind on so building another kit is just too much for me right now. I mean doing the paint job on an existing toy would be easiest. I dont know maybe I will get impatient and just do the kit. hmmmmmmm........ Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 5, 2008 Author Share Posted March 5, 2008 Good point. I will still have to get the kits though. Since I am such a lazy sombiach I will probably wait until the toynami parts come out and put on a toynami milia. I really am spread out with my time and have a few projects already that I am way behind on so building another kit is just too much for me right now. I mean doing the paint job on an existing toy would be easiest. I dont know maybe I will get impatient and just do the kit. hmmmmmmm........ Oh I know you will get impatient I'll wait for you to tell me that you are working on one of these *looks at watch* "should be annnnnyyyy time now" Quote Link to comment Share on other sites More sharing options...
miriya Posted March 5, 2008 Share Posted March 5, 2008 Oh I know you will get impatient I'll wait for you to tell me that you are working on one of these *looks at watch* "should be annnnnyyyy time now" definitely a slow process! Quote Link to comment Share on other sites More sharing options...
Fly4victory Posted March 5, 2008 Share Posted March 5, 2008 Exercise care like I said the Toynami is not exactly 1/100. The forearm armor and chest plate do not fit well. Quote Link to comment Share on other sites More sharing options...
rosedoggydog Posted March 5, 2008 Share Posted March 5, 2008 Thanks for the kind words, but this one is no big deal. For this one, one needs to gather up all his/her artistic talents and set them aside, as they won't be needed. All one needs to make this are the items in the pic. In case anyone is wondering where the shiny Sharpie streaks are, the flat clear coat makes them disappear. Optional supplies for the boxing gloves: edit: One can substitute any beer or alcoholic beverage of one's choosing. Or, although I can't imagine doing so, one can skip the alcohol. That looks good, I like it. I used Krylon to seal mine and when looking at the enlarged pics, I'm not too thrilled about the way it dried. I thought about lining mine in pencil then sealing but I might go over in Gundam. Quote Link to comment Share on other sites More sharing options...
atreyu2112 Posted March 6, 2008 Share Posted March 6, 2008 I spoke with someone at Toynami yesterday & asked about when the new stuff will be available. He said strike parts in April (which are now known as wave 3), the weathered 1S' & CF will be out in May and will include both original accessories and the strike parts (now wave 4). The armor set will be available 4th quarter 2008... & we should see something very cool displayed at SDCC this year (hinted at a wave of ENEMY MECHA). Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 6, 2008 Author Share Posted March 6, 2008 I spoke with someone at Toynami yesterday & asked about when the new stuff will be available. He said strike parts in April (which are now known as wave 3), the weathered 1S' & CF will be out in May and will include both original accessories and the strike parts (now wave 4). The armor set will be available 4th quarter 2008... & we should see something very cool displayed at SDCC this year (hinted at a wave of ENEMY MECHA). SWEET!!! THANKS FOR THE INFO!!! We'll see though Quote Link to comment Share on other sites More sharing options...
rosedoggydog Posted March 6, 2008 Share Posted March 6, 2008 OH BOY! Emerald City Comic Con is coming up in May in Seattle...I sure hope that Series 3 is there. Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 6, 2008 Author Share Posted March 6, 2008 OH BOY! Emerald City Comic Con is coming up in May in Seattle...I sure hope that Series 3 is there. I just checked out the site....but I failed to find Toynami on the roster. Quote Link to comment Share on other sites More sharing options...
Alpha OTS Posted March 6, 2008 Share Posted March 6, 2008 & we should see something very cool displayed at SDCC this year (hinted at a wave of ENEMY MECHA). I want to believe. Oh, how I want to believe...... Quote Link to comment Share on other sites More sharing options...
jenius Posted March 6, 2008 Share Posted March 6, 2008 LOL, really folks, they debuted the fast packs at which convention? Let's say Toynami amazes us with some sweet enemy mecha at SDCC... when do you think we'd be able to buy it? 2010? Quote Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted March 6, 2008 Share Posted March 6, 2008 Hey Wicked Ace, the bad thing about Sharpie markers, is that the ink turns purple after a while...it happened to my Gundam figures I panel lined with them. Quote Link to comment Share on other sites More sharing options...
Wicked Ace Posted March 6, 2008 Share Posted March 6, 2008 Hey Wicked Ace, the bad thing about Sharpie markers, is that the ink turns purple after a while...it happened to my Gundam figures I panel lined with them. I've never had a problem with Sharpie'd black after a clear/flat coat has been applied. Of course I have only used Sharpie for very small stuff a total of two times. Quote Link to comment Share on other sites More sharing options...
misterryno Posted March 6, 2008 Author Share Posted March 6, 2008 Hey Wicked Ace, the bad thing about Sharpie markers, is that the ink turns purple after a while...it happened to my Gundam figures I panel lined with them. That's one of the many reasons I hate Sharpies. I only use the Micron markers. Quote Link to comment Share on other sites More sharing options...
Wicked Ace Posted March 6, 2008 Share Posted March 6, 2008 Panel lines? Are you talking about the super fine point sharpies? Quote Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted March 6, 2008 Share Posted March 6, 2008 Panel lines? Are you talking about the super fine point sharpies? Yes. Quote Link to comment Share on other sites More sharing options...
Wicked Ace Posted March 6, 2008 Share Posted March 6, 2008 Yes. Ah. I think the fat tip Sharpie (lots of ink) I used for the stripes, not panel lines, is a different deal. Again, the stripes on the wings, fuselage, and v-stabs were hit with a flat/clear -- shouldn't be any purple-ing. I'll let everyone know if the stripes change color. Quote Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted March 7, 2008 Share Posted March 7, 2008 Ah. I think the fat tip Sharpie (lots of ink) I used for the stripes, not panel lines, is a different deal. Again, the stripes on the wings, fuselage, and v-stabs were hit with a flat/clear -- shouldn't be any purple-ing. I'll let everyone know if the stripes change color. I used the fat ones for stripes and trim on my other toys too, and after sometime they turned purple. =(. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.