CdnShockwave Posted May 14, 2007 Posted May 14, 2007 I got some Takatoys stickers and the instructions say to use isopropilic alcohol to clean the valk's surface. Now, I'm no chemist so I just want to make sure. Is isopropyl rubbing alcohol what I'm looking for? I went to the drug store and picked up a bottle. Just wanted to confirm that isopropilic and isopropyl are the same thing or not. Can anyone help me out? Quote
kensei Posted May 14, 2007 Posted May 14, 2007 yes it's alright. I recommend only using 70% v/v though. Quote
David Hingtgen Posted May 14, 2007 Posted May 14, 2007 Second that. 90%+ is basically the world's best paint stripper for "plastic toys painted in China"---like valks. But it usually won't harm any plastic in the slightest--I've soaked parts in 99% for days. Quote
Auto Pilot Off Posted May 15, 2007 Posted May 15, 2007 yeah i used this isopropyl rubbing alcohol on my valk to clean the areas where im goin to put the stickers... no reaction happened it just clean some dirt aaway... so it should be safe... Quote
big F Posted May 18, 2007 Posted May 18, 2007 Second that. 90%+ is basically the world's best paint stripper for "plastic toys painted in China"---like valks. But it usually won't harm any plastic in the slightest--I've soaked parts in 99% for days. I have a 1 gallon can of 90%, as David says its great for stripping paint and cleaning brushes and Air Brushes. Love the stuff. Quote
MechTech Posted May 19, 2007 Posted May 19, 2007 I couldn't work without it! Styrene is softer than ABS and I've have no problems with it ever. Go easy on the paint. 70% can thin off some dried paint if you let it soak too long. - MT Quote
kensei Posted May 19, 2007 Posted May 19, 2007 Yeah, you should wipe surfaces, not soak them, I don't think that takatoys stickers actually require a whole soaking of a valk to have to be able to clean it. Quote
pfunk Posted May 19, 2007 Posted May 19, 2007 carefull, ABS and most thermo plastics will become brittle if over exposed to alchohol Quote
GobotFool Posted May 19, 2007 Posted May 19, 2007 Just a question, is this stuff safe to use on an old 1/55? I have a strike valkyrie and some one panel lined it. I really don't like the effect that much and have been wanting to remove it, but I've been worried about damaging the plastic in the process. Quote
MechTech Posted May 19, 2007 Posted May 19, 2007 Like I was saying abaove, you're good with ABS (the chunky monkies are made of that). A Q-Tip soaked in it should get down there. Just don't let it soak in any one spot at a time or the paint can sometimes lighten up. Be sure to use good ole 70% (grocery store/pharmacy), not the industrial 90% and you'll be very safe. -MT Quote
GobotFool Posted May 20, 2007 Posted May 20, 2007 Like I was saying abaove, you're good with ABS (the chunky monkies are made of that). A Q-Tip soaked in it should get down there. Just don't let it soak in any one spot at a time or the paint can sometimes lighten up. Be sure to use good ole 70% (grocery store/pharmacy), not the industrial 90% and you'll be very safe. -MT Cool. In the past I've used other forms of alchohol that have damaged the plastic. So I just wanted to be extra sure. Quote
big F Posted May 20, 2007 Posted May 20, 2007 Cool. In the past I've used other forms of alchohol that have damaged the plastic. So I just wanted to be extra sure. Yeah the Q-tip method is the best way. I have used 90% on a few of my chunkies but these have all been yellowed and destined to be customed. Otherwise just use 70% or less. 90% on a Q-tip removes paint nicely on Transformers, So you can paint em properly. Quote
P.W.Royce Posted May 20, 2007 Posted May 20, 2007 Generally rubbing alcohol is safe on toys, although it can craze vacuum metalized parts (like on Transformer trans-metals, or old Voltron type toys). You can always cut it with water just to be safe. I always dilute it first and then test in a hidden area. If it isn't strong enough, then step up to full strength. Incidentally, HP recommends a 50/50 isopropyl and water mix to clean their lap-top screens, safer than the ammonia and/or phosphates in most window cleaners. Just don't use denatured alcohol by mistake, that stuff is a serious solvent! Great for fueling those little backpacking stoves you can make out of a Pepsi can: http://en.wikipedia.org/wiki/Pepsi_can_stove Quote
MechTech Posted May 21, 2007 Posted May 21, 2007 That's cool! Now I want to go hiking just to try one out The alcohol should not harm the chrome plating, but will definitely take off tinting like gold colors right away. Usually they plate with chrome and then coat with a tint to colorize it. The tiniting will come of with detergent too. My wife cleaned pine sap off some gold glass, chromed Christmas ornaments. Now they're silver and not gold colored. - MT Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.