MechTech Posted September 11, 2006 Share Posted September 11, 2006 (edited) Hey guys, I accidentally discovered a new type of glue that uses a different type of non-stinky solvent. The solvent in it is Trichloromethane Methylene Chloride. This stuff has no solvent smell and it works fast! You probably won't get headaches from using it in large quantities either (though some of you might miss that ). Still use good ventilation though!!! "Trike" can irritate your lungs/skin badly. This stuff is perfect for those of you in small apartments or are tired of your wives complaining about the smell. It's water thin, works and dries fast and is a very strong solvent! Works great for dissimilar plastics joining too! The brand here I've got is called EMA Plastic Weld ( http://www.ema-models.co.uk/shop/prodpages/page-PPC-2P.html ). For the U.S., Plastruct makes it ( http://www.plastruct.com/pages/CementGuide.html ). This stuff has been around awhile, but I have never heard of it. I've used about everything on the market and I wish I knew about this stuff a while ago so I'm getting the word out! It cost me £2.50 / $5.00. Many of you might have used it, but I've never seen it or heard of it before. Hope this helps someone! - MT Edited September 11, 2006 by MechTech Quote Link to comment Share on other sites More sharing options...
ghostryder Posted September 11, 2006 Share Posted September 11, 2006 (edited) As a warning, don't use methylene chloride (AKA dichloromethane) for modeling unless you have a very well ventilated work area. This stuff is about 2 to 5X as toxic as the stuff in normal model cement (MEK). MSDS ...but, if it can effectively bond a broken BP8, then glue away (just dont inhale)! Edited September 11, 2006 by ghostryder Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted September 12, 2006 Share Posted September 12, 2006 There's a surprisingly low correlation between smell and safety. Some of the nastiest glues have no odor at all, yet basically increase your risk of cancer about 1% per minute of exposure... Tenax has no smell, but evaporates so fast and works so well it worries me. Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted September 12, 2006 Share Posted September 12, 2006 Never have I been afraid of glue until reading this thread. But what the heck, I'll buy some! Quote Link to comment Share on other sites More sharing options...
ghostryder Posted September 12, 2006 Share Posted September 12, 2006 (edited) Never have I been afraid of glue until reading this thread. But what the heck, I'll buy some! You're right, you only need about 20% of your brain cells to function anyways. I killed about a billion in college, what's a billion more ? Seriously, use whatever works best in the name of modeling and modding, but keep those windows open . Edited September 12, 2006 by ghostryder Quote Link to comment Share on other sites More sharing options...
MechTech Posted September 12, 2006 Author Share Posted September 12, 2006 Thanks for the heads up! I had no clue. Like I said this stuff was new to me, but now I know better! I'll probably reserve it for areas requiring higher strength. That's the great part about these forums, someone always knows something you don't! Thanks! - MT Quote Link to comment Share on other sites More sharing options...
Pat Payne Posted September 12, 2006 Share Posted September 12, 2006 As a warning, don't use methylene chloride (AKA dichloromethane) for modeling unless you have a very well ventilated work area. This stuff is about 2 to 5X as toxic as the stuff in normal model cement (MEK). MSDS ...but, if it can effectively bond a broken BP8, then glue away (just dont inhale)! Actually, I'd suggest staying away from MEK altogether, as it's a known carcinogen. As for methylene chloride, what's this about it creating phosgene (a toxic gas used in WW1, BTW) under the right conditions? I think I'll stay with Testor's and Krazy Glue for the nonce... Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted September 12, 2006 Share Posted September 12, 2006 Pure MEK is pretty nasty, to the point of "outdoors only on a windy day" for some people. It's one heck of a solvent. But there are many useful glues that are part MEK---many somewhat rubbery "all purpose" glues fall in that category. Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted September 13, 2006 Share Posted September 13, 2006 Okay now I'm really scared. Quote Link to comment Share on other sites More sharing options...
Gabe Q Posted September 13, 2006 Share Posted September 13, 2006 There's a surprisingly low correlation between smell and safety. Some of the nastiest glues have no odor at all, yet basically increase your risk of cancer about 1% per minute of exposure... Tenax has no smell, but evaporates so fast and works so well it worries me. Should I be worried? I use Tenax all the time. You're scaring me... Quote Link to comment Share on other sites More sharing options...
David Hingtgen Posted September 13, 2006 Share Posted September 13, 2006 Well the weird thing is---some people think Tenax has a distinct smell, some people (like me) cannot smell it at all even when trying. Basic fact: all solvents are bad. Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted September 14, 2006 Share Posted September 14, 2006 Well I guess I've probably got a considerable amount of brain damage by now. *dabs drool from chin* I hope it's not 2 knotizoble... Quote Link to comment Share on other sites More sharing options...
MechTech Posted September 14, 2006 Author Share Posted September 14, 2006 Yap, I be knowticen' : I forgot to mention, that day I used it, I slept lowsy that night. I was all hyper. I didn't think much of it because I was on holiday and going back to work the next day (who likes to do that). - MT Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted September 15, 2006 Share Posted September 15, 2006 Just be careful, or you may some day find yourself borrowing my chin-tissue. Quote Link to comment Share on other sites More sharing options...
Valkyrie Posted September 15, 2006 Share Posted September 15, 2006 Man, and I've been using plastic cement a lot over the past couple weeks... I hope I didn't brain my damage Quote Link to comment Share on other sites More sharing options...
HWR MKII Posted September 15, 2006 Share Posted September 15, 2006 (twitch twitch DROOOLLLL twitch) Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted September 16, 2006 Share Posted September 16, 2006 *slowly climbs back into chair after recovering from seizure* Quote Link to comment Share on other sites More sharing options...
Retracting Head Ter Ter Posted September 29, 2006 Share Posted September 29, 2006 (edited) This would make a good advertisement for Yamato. Glue Kills! Buy ready made toys! Kill your wallet instead of your brain! Edited September 29, 2006 by Retracting Head Ter Ter Quote Link to comment Share on other sites More sharing options...
GutsAndCasca Posted October 2, 2006 Share Posted October 2, 2006 Or howabout a T-shirt that says: "YAMATO 4 LIFE! What's the point of dying with money?" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.