Jump to content

yellowing


kanedaestes

Recommended Posts

i have a question, is it direct sunlight that causes yellowing or just prolonged exposre to outdoor light. see i light to have my blinds open in my room, and i am worried that over time my 1/48 my start yellowing, but the dont get direct sunlight so if it is sunlight then they should be fine right? oh and go see batman begins

Link to comment
Share on other sites

Yellowing can be caused by several factors.

1. UV light: such as sunlight can cause this.

2. Chemical reactions: sometimes the plastic in the toy will react with the fumes slowly released by other types of plastic in the same package (Like the clear plastic window on the toy's display box or fumes from the decals).

3. Pollutants in the air, such as tobacco smoke will also contribute to the yellowing of a toy.

4. Oxidation, the plastic or some substance in the plastic could react with the oxygen in the air causing the material to break down and discolor.

The only way to completely prevent this from happening is to remove the toy from it's package. Place it in an airtight case made of an inert substance and then pump out all of the air and replace it with a non-reactive gas like nitrogen. If you do this the toy should remain in perfect condition for a century or two.

However for most of us, simply removing the toy from the package and displaying it in a smoke-free home in an area free of sunshine should be sufficient.

I have a wing assembly from an old, extremely yellowed Jetfire (Bandai VF-1S Valkyrie) which I have been experimenting on over the years in order to see just what helps and hurts this type of plastic.

I have found that treating the plastic with the following will do nothing to "whiten" up the yellowed plastic:

Bleach

Oxiclean

Peroxide

Toothpaste

Hot water

Cold Water

Freezing

Sunlight

Soap

Laundry Detergent (Tide, Era & Cheer have been tried)

The only thing which I have used which lightened the yellowing at all was ZAP Restore solution, but this makes sense as it is a combination of Hydrocloric and Phosphoric acids and basically ate away some of the yellowed plastic.

Obviously I would not advise using this product to "De-age" a Valkyrie as exposure to harsh acid can only damage the plastic further and potentially cause it to age at a much faster rate after being exposed to it.

Simply buffing the plastic with a rubbing compound or very fine grade sandpaper would acheive the same result without the chemical stress to the plastic.

Other than that about the only thing I can see to do to whiten a yellowed valk is to paint it. :rolleyes:

Ultimately, prevention is really the only way to keep these things white.

Link to comment
Share on other sites

LOL. I had wrapped, in an airtight bag no less, one of my Bandai Strike Valkyries and stuffed it under my bed for countless years. A few days ago I checked on it, only to see that it too is starting to yellow...Yellowing happens, it's just a matter of time and circumstance...

Link to comment
Share on other sites

Hope I got my conditions right. Cheeck this out and point out any errors:

-Humidity low

-No direct sunlight

-lightly tinted glass windows

-lights never on for more than 5 minutes at a time, if at all

-temperature range 16 to 24 degrees celcius

Anything else I missed, can improve on?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...