Renato Posted April 1, 2005 Posted April 1, 2005 Grahamany chance yamato wil rpoducte a separate 1/48 Tv series booster pack?? no. they only released the TV armor with the VF-1J hikaru and the M&M's(but those are colored). if you want the TV FP armor, you got 2 choices....buy a super VF-1J or try and convince someone to sell their TV armor. otherwise you can get the strike armor and not use the strike cannon(though the color isn't the same). The movie arm armour is different to the TV one. Quote
connor99 Posted April 1, 2005 Posted April 1, 2005 (edited) Rick Randy, just post an ad at the Wanted section of the boards. It's easy and you might get lucky enough to get a reply from someone who might have an extra set of TV FP's they're willing sell. I did that last week and sure enough I'm getting me a set to outfit one of my 1/48 HIKARU 1J's ! Edited April 1, 2005 by connor99 Quote
Shin Densetsu Kai 7.0 Posted April 1, 2005 Posted April 1, 2005 Re: [???] The unknown outcome by the end of '05Posted by: MattAlt (Moderator) Date: March 31, 2005 08:09PM The Aquarion stuff looks decent in toy form (that's definitely one of the prototypes that Kawamori's holding), but the show itself kinda leaves me cold. I find the robots a little "busy" for my tastes. They were handing out DVD "teasers" at the fair, but it isn't long enough to really make up my mind one way or the other. Forget that, though: Yamato had a complete prototype of the 1:48 Armored Valkyrie on display, and it looked spectacular. Too bad I didn't have a camera with me! from toyboxdx Quote
kensei Posted April 1, 2005 Posted April 1, 2005 Re: [???] The unknown outcome by the end of '05Posted by: MattAlt (Moderator) Date: March 31, 2005 08:09PM The Aquarion stuff looks decent in toy form (that's definitely one of the prototypes that Kawamori's holding), but the show itself kinda leaves me cold. I find the robots a little "busy" for my tastes. They were handing out DVD "teasers" at the fair, but it isn't long enough to really make up my mind one way or the other. Forget that, though: Yamato had a complete prototype of the 1:48 Armored Valkyrie on display, and it looked spectacular. Too bad I didn't have a camera with me! from toyboxdx A final complete prototype? Then the pics are old? Damn, that gives them 3 months to release this baby I reckon or at least officially announce it. Assuming that it is a complete prototype. Quote
Graham Posted April 2, 2005 Author Posted April 2, 2005 A final complete prototype? Then the pics are old? Damn, that gives them 3 months to release this baby I reckon or at least officially announce it. Assuming that it is a complete prototype. Don't forget the long lead time in print magazine publishing. Graham Quote
MGREXX Posted April 2, 2005 Posted April 2, 2005 (edited) I WANT MY 1/48 ARMOR!!!!!!!!!! (wallet starts crying) Edited April 2, 2005 by MGREXX Quote
UN Spacy Posted April 2, 2005 Posted April 2, 2005 IF this is indeed true I'm surpised MW hasn't come up with pics. What was the fair this guy from TBDX was referring to. Quote
pfunk Posted April 2, 2005 Posted April 2, 2005 wow, dont know if this was posted yet, didnt feel like reading,,,,anyway,, Looks like the hinge on the missle cover for the arm actually retracts to hide the pin when closed. I think a lot of development is going into this one, more then the FP's Quote
Bariaburu Faita Posted April 2, 2005 Posted April 2, 2005 IF this is indeed true I'm surpised MW hasn't come up with pics. What was the fair this guy from TBDX was referring to. probably Tokyo Superfest. Very simillar to Wonderfest but smaller. Quote
GRAND CANNON Posted April 2, 2005 Posted April 2, 2005 Here's a Zinc Panic pic and article from Anime Fair 05: http://www.zincpanic.com/view_article.phtml?id=22898 Quote
Ido Posted April 2, 2005 Posted April 2, 2005 (edited) HUGE! Notice the nosecone! Edited April 2, 2005 by Ido Quote
Black Valkyrie Posted April 3, 2005 Posted April 3, 2005 Nice but they`ed fix the nosecone before releasing. Quote
aaajin Posted April 3, 2005 Posted April 3, 2005 O' o'....Im so gonna buy multiples of this sucker Quote
1 VF-1 2NV Posted April 3, 2005 Posted April 3, 2005 O' o'....Im so gonna buy multiples of this sucker OMFG . Me too . Quote
Radd Posted April 3, 2005 Posted April 3, 2005 Notice the nosecone! I can't see the nosecone, there appears to be a piece of GBP in the way. Anyways, this looks most excellent. I can't wait to nab mine, packaged with a VF-1J. Quote
kensei Posted April 3, 2005 Posted April 3, 2005 My only dislike is the crotch armour piece. I think they should have made it so that the nosecose must be removed. Minor bitch only, it still looks absolutely fabulous. Multiples it is, and it's not just going to go on a J! I want to see someone makle a Max and Millia version of the armour, stuff the LV. Quote
Air Elijah Posted April 3, 2005 Posted April 3, 2005 (edited) Notice the nosecone! I can't see the nosecone, there appears to be a piece of GBP in the way. Anyways, this looks most excellent. I can't wait to nab mine, packaged with a VF-1J. Looks like they decided against the "remove the nose cone" option but I wonder if they will make that nose cone cover removeable so you can chose to go with our without nose cone. The whole armor suit is fracking HUGE. It has to be though since the line art was so slim it left no real room for a valk inside. The chest area shows this most readily. Looking good though. I can't wait to pick a set up! Edited April 3, 2005 by Air Elijah Quote
Fugly Posted April 3, 2005 Posted April 3, 2005 Holy fart...that's intense. Wowzers, I hope they sell it as a two-pack, ala 1/55 and 1/60...and sepreately, but if they sold one together I'd SO get one...wow. Who'd be up to spray-painting it into a Low Viz. Version? I would... Quote
Ensign G Posted April 3, 2005 Posted April 3, 2005 Wish i had a low viz....that would go great even with the prototype color! Quote
Aegis! Posted April 3, 2005 Posted April 3, 2005 OK....I think I´ve just crapped my pants right now that´s just a nice and attractive as the Thunder Humers custom IMO , whish is something GOOOOOOD. I´m so getting a bundle of this. Quote
kensei Posted April 3, 2005 Posted April 3, 2005 (edited) Can't wait to see a pic with the Mickey Mouse hands on. Man, this valk looks so tanked up! I really, really hope that it comes at the end of the year. Edited April 3, 2005 by kensei Quote
connor99 Posted April 3, 2005 Posted April 3, 2005 Thanks for posting the pic, GRAND CANNON! That 1/48 GBP Armor looks absolutely beautiful ! Quote
Yohsho Posted April 3, 2005 Posted April 3, 2005 Ok seeing that pic. I will definately need to pick this up when it comes out. Hopefully in a 1J bundle to show off its glory. Quote
EXO Posted April 3, 2005 Posted April 3, 2005 (edited) The return of Bulky Lee! HBAR HBAR HBAR HBAR HBAR HBAR HBAR HBAR HBAR Edited April 3, 2005 by >EXO< Quote
Graham Posted April 3, 2005 Author Posted April 3, 2005 I'm betting that the nose cone cover will be a removeable part. Graham Quote
zeo-mare Posted April 3, 2005 Posted April 3, 2005 awesome pics i cannot wait for this to come out. chris Quote
Graham Posted April 3, 2005 Author Posted April 3, 2005 Looking closely at the groin armor it looks like the nosecone cover is a separate piece and not molded as one-piece with the groin armor. You can clearly see the line between the groin armor proper and the additional nosecone cover. I think Yamato have chosen to go both ways with the GBP, you either have the Valk with no nosecone and no nosecone cover, or you keep the nosecone on the Valk and use the nosecone cover. (gawd... is this what life has come to, starring at robots groins ). Graham Quote
EXO Posted April 3, 2005 Posted April 3, 2005 Looking closely at the groin armor it looks like the nosecone cover is a separate piece and not molded as one-piece with the groin armor. You can clearly see the line between the groin armor proper and the additional nosecone cover.I think Yamato have chosen to go both ways with the GBP, you either have the Valk with no nosecone and no nosecone cover, or you keep the nosecone on the Valk and use the nosecone cover. (gawd... is this what life has come to, starring at robots groins ). Graham I could kinda see what your talking about. but it's hard to tell wether it's a raised panel or a separation line. I'll get a couple of these but it looks so big. It looks like a little valk buying from the Big And Tall Valk store. Quote
kensei Posted April 3, 2005 Posted April 3, 2005 Looking closely at the groin armor it looks like the nosecone cover is a separate piece and not molded as one-piece with the groin armor. You can clearly see the line between the groin armor proper and the additional nosecone cover.I think Yamato have chosen to go both ways with the GBP, you either have the Valk with no nosecone and no nosecone cover, or you keep the nosecone on the Valk and use the nosecone cover. (gawd... is this what life has come to, starring at robots groins ). Graham I could kinda see what your talking about. but it's hard to tell wether it's a raised panel or a separation line. I'll get a couple of these but it looks so big. It looks like a little valk buying from the Big And Tall Valk store. That's great! Yamato satisfies both categories! What a smart sculptor! Quote
Anubis Posted April 3, 2005 Posted April 3, 2005 Wow, that looks awesome. Odds of my buying this are increasing. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.