Hiriyu Posted February 6, 2005 Share Posted February 6, 2005 Hey TOONZ, Barring sending it in for replacement, you could use a very fine drill (say .090" - .100") and insert a small rod with a suitable interference fit to allow for rotation, without ungluing anything. Good Luck! Quote Link to comment Share on other sites More sharing options...
zeo-mare Posted February 6, 2005 Share Posted February 6, 2005 (edited) only problem is if he ever wants to sell it, it will no longer be mint, if he does not care and just wants to have it on a shelf, then yea that will be perfect, but if he is a serious collector then it has lost value and getting a new one may be more worth it. chris Edited February 6, 2005 by zeo-mare Quote Link to comment Share on other sites More sharing options...
Caufield Posted February 6, 2005 Share Posted February 6, 2005 got my green alpha and my left arm broke does anyone know how to fix it? im desperate how did it break? i'm about to go and buy my first one, the green one... Quote Link to comment Share on other sites More sharing options...
F14Tomcat Posted February 7, 2005 Share Posted February 7, 2005 (edited) well at this stage due to this latest incident im 40/60 in favor of not not buying the alpha's (stupid factory in china or where ever they come from and there QC) man this makes me angry i really liked the alpha to Edited February 7, 2005 by F14Tomcat Quote Link to comment Share on other sites More sharing options...
Feyd-Rautha Posted February 7, 2005 Share Posted February 7, 2005 All the alpha's share the weak point on the white "bicep" part of the arm. I had my 3rd replacment scott arrive too me with the left arm dangling by this weak point.. - i very carfully split the shoulder open..went quite well..then - then split open the upper bicep from the lower bicep ...revealing the post on the lower half of the bicep(with rubber gromet). .....the rubber gromet leaves a gap where; once you fit the top half of the bicep back on it ...You find that it will dangle because of this gap! I wound some thread extemely tightly arong the post with grommet too fill the gap..and then re-inforced it with some decal material too furtur reduce gap. Then i glued the pieces back together carefully..... Now it looks better than it did from the factory!!! ...the glued area even looks better(not saying much for china's q.c.) on top of that it's nice and tight!!!! bottom line...now i can yank the arm out of the shoulder and forearm and the bicep is not loose OR dangling at all! in Toynami's defense.. my first Yamato 1/60 id dangling at the exact same section of the arm ....and there's NO way it won't show if i pry it's arm open ..and otherwize the bernard is really well put together! bottom line..because of the missle hatch on the shoulder...there is'nt much visible seam line on the shoulders...this is ideal if you find yourself having too do what i did...you can't tell it's even been taken apart gooood luk with your tho man, it looks like the post Snapped on yours..it will reqire more work...but if you open the shoulder and upper bicep...get yourself a new arm post and re-assemble from ther or have toynami REPLACE the entire unit!!!! Quote Link to comment Share on other sites More sharing options...
Black Valkyrie Posted February 7, 2005 Share Posted February 7, 2005 If I was you I would check HLJ or any other toy site for Gundam spare parts !, till now I don`t owe one, no interest. Quote Link to comment Share on other sites More sharing options...
Godzilla Posted February 8, 2005 Share Posted February 8, 2005 I just got my Lancer Alpha for $60 at the Emerald City Comic Con. I inspected mine in front of the dealer. Quote Link to comment Share on other sites More sharing options...
TheLoneWolf Posted February 9, 2005 Share Posted February 9, 2005 Hey Toonz, another alternative would be to sell your broken Alpha for spare parts. When a friend broke my 1/60 Roy (made sure he reimbursed me) I sold it for spare parts here on MW in order to help out others who have broken valks. As it turns out, I actually made more money selling it in pieces than I ever would have made selling it broken or as a whole. Given Toynami's track record with broken toys, you just might have a diamond instead of a dud Quote Link to comment Share on other sites More sharing options...
zeo-mare Posted February 10, 2005 Share Posted February 10, 2005 i do not know if this has been posted yet but the Shadow Alpha is showing up on ebay it looks nice i like the gun for it, i also like the fact the the gun stores on top in the fighter mode Shadow Alpha chris Quote Link to comment Share on other sites More sharing options...
Majestic Posted February 10, 2005 Share Posted February 10, 2005 i do not know if this has been posted yet but the Shadow Alpha is showing up on ebay Looks like its still a pre-order shipping in March. Quote Link to comment Share on other sites More sharing options...
zeo-mare Posted February 10, 2005 Share Posted February 10, 2005 yea i know, but this is the first real pics i have seen of it yet, i am not sure if others have been posted in this old thread, but i did not see any in the new thread so i thought i would post for others to see. chris Quote Link to comment Share on other sites More sharing options...
Majestic Posted February 10, 2005 Share Posted February 10, 2005 Roger that. First I've seen of it. Doesn't look too bad other than the usual complaint about it not being accurate to the Shadow shoulders, etc. Quote Link to comment Share on other sites More sharing options...
zeo-mare Posted February 10, 2005 Share Posted February 10, 2005 i agree i still like it alot, but i fear that they did not fix anything on this one, i was hoping by the third release of the Alphas that they would have hammered out all the flaws it looks like they did not. i fear this one wil have the exact same problems as the other ones. which sucks because it does look cool specially in fighter mode. chris Quote Link to comment Share on other sites More sharing options...
jenius Posted February 10, 2005 Share Posted February 10, 2005 The green one is easily receiving the least complaints of all the alphas so far. This could mean two things. 1) Quality has improved slightly. 2) People have accepted its faults and learn to handle it more gingerly. Quote Link to comment Share on other sites More sharing options...
Uxi Posted February 10, 2005 Share Posted February 10, 2005 Since I skipped the first precisely because of QC concerns, I'd lean on the former. My Alpha is pretty good, if not perfect (at least as much as any of my Yamato, 1/48 included). Also like my 1/48, there are a couple places I'm afraid I might break, due to the design (backpack hinge on the 1/48 versus the front wings on the sides of the cockpit on the Alpha)... Quote Link to comment Share on other sites More sharing options...
Hiriyu Posted February 10, 2005 Share Posted February 10, 2005 The green one is easily receiving the least complaints of all the alphas so far. This could mean two things. 1) Quality has improved slightly. 2) People have accepted its faults and learn to handle it more gingerly. Owning all 3 of the released versions, I'd say that #2 is closer to the mark. To me, there is no discernable difference in construction or engineering between any of the available models. I think that the "quality" of one or another seems to depend largely upon luck of the draw. That said, I've been lucky with each of mine (all low production numbers), while others seem to have been less lucky. I still think these are a damn sight better than the next most comparable Legioss', those being the Gakken 2 and 3-mode 1/55-ish toys. Quote Link to comment Share on other sites More sharing options...
jenius Posted February 10, 2005 Share Posted February 10, 2005 (edited) I still think these are a damn sight better than the next most comparable Legioss', those being the Gakken 2 and 3-mode 1/55-ish toys. Man, I have a tough time agreeing with that statement. Not so much because I don't love the new Legioss but because I also really love the old ones. the 1/35 are clearly more durable and less prone to getting sloppy joints. Of course, the 1/35 eventually can break and get sloppy joints but it takes some time with those bad boys. The 1/55 MPCs are clearly better detailed with better materials but I dare anyone to spin an arm around a dozen times and then try to still get it to hold a gun completely horizontal to the ground. Now I did just buy the Imai 1/48 variable models and would love to see how those stack up... unfortunately I'm gonna have to practice on a lot of other models before I try building and painting those. Check back with me in 5 years for an opinion... Finally, the diecast two changes are great for display.. that's about it. They don't really hold a candle to the other toys/models mentioned. *edit* The gakken 1/72 aren't in the same league as these figures. Edited February 10, 2005 by jenius Quote Link to comment Share on other sites More sharing options...
Hiriyu Posted February 10, 2005 Share Posted February 10, 2005 Yep Jenius, the diecast 2-changers and the very slightly smaller 3-mode toys are the ones I am referring to as 1/55-ish (not those horrid 1/72 cheapos, although they are marginally cool in that they are the only ones ever produced with the option for a Beta linkup, impossibly pricey though they may be). I too think that the original 1/35 are in a class of their own (I've got one too), but are not really directly comparable to the Toynami pieces either. Rated by size/scale, I stand by my comment Quote Link to comment Share on other sites More sharing options...
Apollo Leader Posted February 10, 2005 Share Posted February 10, 2005 One problem that shouldn't exist with the Shadow is its hands. The much more robust claw looking hands shouldn't fall apart like the fragile ones from the first three Alphas. Quote Link to comment Share on other sites More sharing options...
zeo-mare Posted February 11, 2005 Share Posted February 11, 2005 One problem that shouldn't exist with the Shadow is its hands. The much more robust claw looking hands shouldn't fall apart like the fragile ones from the first three Alphas. we can definetly pray that you are right chris Quote Link to comment Share on other sites More sharing options...
LtStick Posted February 11, 2005 Share Posted February 11, 2005 I haven't had any problems with the hands on mine knock on wood. They must have taklen some steps to improve QC on the Lancer Alpha as I haven't heard of as many people haveing problems as the previous ones. So who knows maybe there actually listening. Either that or they got tired of people shipping defective and broken ones back to them. the new Bookends with the Alpha & Enforcer look nice. Saw places have it and the shadow on pre order. Quote Link to comment Share on other sites More sharing options...
eyesonme78 Posted February 12, 2005 Share Posted February 12, 2005 Got my lancer tonight, from Twin moons great manz..no problems, transformation A Okay, transfomred about 5 times.. apllied stickers looks fantastic... think will be looking forward to shadow alpha. Quote Link to comment Share on other sites More sharing options...
promethuem5 Posted February 12, 2005 Share Posted February 12, 2005 Sorry to go a bit OT, but which Alpha fighter /Legioss toy was 1/72 scale? Quote Link to comment Share on other sites More sharing options...
Feyd-Rautha Posted February 12, 2005 Share Posted February 12, 2005 the 1/72 one....by gakken,was 1/72 scale. Quote Link to comment Share on other sites More sharing options...
promethuem5 Posted February 13, 2005 Share Posted February 13, 2005 er....umm... what I meant was, which one specifically? There are a bunch of Gakkens... what scale are the two mode little ones? They look 1/72 based on the cockpit size next to my Mac+ Valks.... Also, how tall would a 1/100 scale ride armor figure be? Quote Link to comment Share on other sites More sharing options...
wolfx Posted February 14, 2005 Share Posted February 14, 2005 Sorry if this was asked before.... I was looking at this ebay auction and the seller mentions that they are not allowed to sell this item below 79.99. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5956212676&rd=1 Is this some kinda price control done by Toynami? Quote Link to comment Share on other sites More sharing options...
LtStick Posted February 14, 2005 Share Posted February 14, 2005 Yes it was asked before but it was most likely in the previous topic related to this. To answer your other question yes Toynami sets the price on the ones they distribute. Quote Link to comment Share on other sites More sharing options...
Ed.Coli Posted February 14, 2005 Share Posted February 14, 2005 Also, how tall would a 1/100 scale ride armor figure be? Considering the pilot figure and armor that came with the 1/48 (Or 1/55 as Toynami claims) Legioss/alpha is already tiny, then a 1/100 figure would probably be incredibly minuscule. Quote Link to comment Share on other sites More sharing options...
Doctor Paragon Posted February 14, 2005 Share Posted February 14, 2005 I admit I am stoked about the new "Shadow Alpha". And hell with the three fingered hands they should hold up better than there predacessors. Quote Link to comment Share on other sites More sharing options...
Shin Densetsu Kai 7.0 Posted February 14, 2005 Share Posted February 14, 2005 Sorry if this was asked before....I was looking at this ebay auction and the seller mentions that they are not allowed to sell this item below 79.99. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...5956212676&rd=1 Is this some kinda price control done by Toynami? Retailer are made to sell them @79.99 for at least 2-3 months. After that they can discount them. The toy itself only costs around 55$ to make. If the retailer does not want to sell @80$ for the first times they will not be allowed to sell the toys. Quote Link to comment Share on other sites More sharing options...
Feyd-Rautha Posted February 14, 2005 Share Posted February 14, 2005 do you guys think that Toynami will release a headless SHADOW DRONE version if the regular shadow sells out quickly?? maybe limited too less than 15,000 even ....i can't see them NOT wanting too milk the basic alpha sculpt for all its worth!! what do you guys think? Quote Link to comment Share on other sites More sharing options...
Cyclone Posted February 15, 2005 Share Posted February 15, 2005 (edited) do you guys think that Toynami will release a headless SHADOW DRONE version if the regular shadow sells out quickly?? maybe limited too less than 15,000 even ....i can't see them NOT wanting too milk the basic alpha sculpt for all its worth!!  what do you guys think? Nope. They can just get away with the stock Alpha body with a few changes and call it a Shadow Fighter, but not the Drone. Edited February 15, 2005 by Cyclone Quote Link to comment Share on other sites More sharing options...
captain america Posted February 15, 2005 Share Posted February 15, 2005 If you look at the Legioss drone carefully, you'll see that it has almost no common parts with the previous models; it's an almost completely different design, as well as a different transformation sequence. I highly doubt they'll ever make that sku. Quote Link to comment Share on other sites More sharing options...
Feyd-Rautha Posted February 15, 2005 Share Posted February 15, 2005 .....goes too check line art at cyc's site or elsewhere.. o.k. i suppose youre right guy's.. .....well here's one for ya : which will be made first...ride armors or treads from toynami??? Quote Link to comment Share on other sites More sharing options...
Graham Posted February 15, 2005 Share Posted February 15, 2005 The toy itself only costs around 55$ to make. I'm sure it actually costs far less than that to make. Graham Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.