Chronocidal

Heheh.. actually, I was able to find quite a bit of info, at least as far as weight, wing area, etc. goes... it's got a much bigger wing than the YF-19, though. I've got to apologize for something, I misread the characteristics the program asks for.. it's not really wingloading. What I thought was weight loading is really just a way of determining how weapon payloads, fuel, etc will affect the aerodynamic model of the aircraft. The system for determining flight characteristics is brutally precise for a game, I must say. As far as the control scheme goes, I think I have an answer that works, but here's the problem: They designed this as a WWII sim from the ground up. What does this mean? Well, mainly, no fancy hydraulic control systems, no high performance flight computers, and no way to make a plane fly well above about 600mph. Microsoft must not have taken creativity into account when they allowed people to put more aircraft in the game. The technology to make newer planes flyable just isn't there. As a rule, any aircraft that goes above about 550mph starts shaking and wobbling like nuts. On top of this, at that speed, the control surfaces become pretty useless from all the air buffeting. Also, in this program, there is no such thing as a flaperon, let alone leading edge controls, thrust vectoring, or any number of modern advances in flight control that something like the YF-19 depends on. I can make the plane as maneuverable as possible, but it's going to be very limited as far as engine performance. Also, the closest I can get to flaperons is to use elevons all along the back edge of the wing. Thanks for all the input, I may still be able to get a decent plane out of this. There aren't many big differences between this game and the other flight sims, so I can probably get everything working in FS2002. I'm going to check out how I can export it to that program, and see how it handles.

Well, there is an in-game shot of it in the CG thread, but it's a rough, untextured model, and has no cockpit at all, and it's been using the stats from an Me-262 Fortunately, I found that I can get a good estimate of the wing area, etc in my modeling program. It'll tell you the surface area of something, or the volume, or whatever, and I can use that to find the various stats of the wings. I did use the RPG stats for it, and I've got most of them written down.. what I don't have, I'm filling in by estimation from modern aircraft of somewhat similar type, fuel stats from F-15, etc...The real trick will be to see if these stats actually result in a plane that will fly.

Dunno if this is quite the right forum for this, but since all the other CG stuff is here, figured I'd try here first. Apart from a working cockpit, my YF-19 model for Microsoft's flight sims is done.. I'm attempting to put it in Combat Sim 3, but several things have got me stuck. CFS3 isn't as simple as some games, where you just put a model in the game, specify it's maneuverability rating, speed, and hull strength, and it works. This thing is asking for everything from wing load coefficients and engine rpm ratings, to the actual wing area and fuel load. Suffice to say it's complex, and would be much easier if I were doing a real plane, with real specs. Is there any website or reference that actually lists such statistics? My guess would be the Macross Design Works book, but I was under the impression that that was mostly artwork. I've got stats for the engine thrust, dimensions, top speeds, max/min takeoff weight, and service ceiling, but that's about it. In the end, I may just end up making stuff up, and hoping that it works. :S Also, does anyone have any info on the actual workings of the YF-19's various control surfaces? Mainly I'm wondering about the wings. The rudders are easy enough to pick out, as are the workings of the canards in the front (just make the whole canard rotate)... but what kinds of control surfaces do the wings use? I'm guessing leading edge slats, from the "NO STEP" decals on the kit there. But the ailerons/flaps/elevons have got me stumped. How are they linked together? From the artwork I've seen, it looks like each of the four sections of the wing control surfaces can move independently...but should they? And does the plane have flaps, or some sort of elevon system?

Well, it's not exactly cg, but I have some news from the flight sim front:

Hey, if you like working on low-poly models, look into modeling for games... Those things would look great in some of the recent space combat games

Ditto... I'm working on a YF-19 right now, just very slowly. Hasegawa definitely slicked back the design a little more than the Yamato 1/72 version... a friend of mine commented that the Yamato looked like a a constipated goose compared to this kit. I can only hope that if Yamato ever releases a 1/48th YF-19 (pleasepleasepleasepleaseplease) they base it off of this version... course, the proportions might be tricky to get, but just as long as they don't make the back end as fat as the 1/72 transformable one, I'll be happy.

For the first few hours, I was so afraid to put any stress on this thing, I was propping it up on coasters, just so it wouldn't bend the leg fins out of shape. talk about obsessive compulsive. Personally, I think my 1/48th Fast Pack -1J looks best in aircraft mode, so I don't transform it much. I just play with the weapon options, and fly it around a little. I leave the fast packs off most of the time too, since they put some stress on the backpack. I would be very afraid to leave this in the hands of someone I didn't know, or knew that they aren't very gentle with their toys. My family, mainly my younger brother isn't a problem though, he likes transformers, and mostly knows their limits.. better yet, he respects my stuff pretty well, so he wouldn't start playing around with it without me saying he could. I probably would have been just fine with one of these at age 10, I've always been hideously careful with toys... building with Legos teaches you that, since they fall apart easily. I play with this just like I'd play with a gundam model, or a model plane, considering I was playing with, and building my own model planes at age 10. There's just a couple things I worry about, and I avoid them... mainly, I don't use the landing gear much, cause I REALLY don't want the rear gear doors to wear down and fall open, and I'm kinda worried about the canopy shield getting scratched up. The backpack is only an issue if I'm using the fast packs. I was actually kinda surprised how sturdy the thing is standing up. I'd never display it that way, for risk of something knocking it over, but I left it standing on it's own in a pretty nice pose for a couple of hours yesterday.

Next week I'll be able to get you cello solo version of the Mac+ theme, "Voices." It's the same as the end credits to the movie version, but with all the vocal parts replaced with cello...beautiful.

Quick and easy (read ghetto) way to fix a loose speedbrake: double up a piece of scotch tape, and stick it inside. Worked for me. I may remove it later though for something better. I'm wondering, is there any way to tighten the black piece the head is attached to? The head rotates fine on the panel, but when in fighter mode, the head rattles around quite a bit. The mount inside the nose seems a bit loose. Btw, is the VF-1J's heatshield painted, or solid plastic?? I'm not too worried about the painted stripe, but I'm wondering if they used clear plastic and just painted it, meaning it will eventually be transparent if the paint comes off.

Just got mine in the mail the other day, appears to be in very good shape (kinda got a surprise when the box came... it was shipped in a Yamato packing box labeled "CONTENTS: 1/48 VF-1S HIKARU 4 PCS" ). I have noticed a couple of things, but they're not anything serious. My speedbrake is a little floppy, and pops open about 1/16th of an inch in battroid (I may just put some double sided tape inside to keep it closed), and the head's a little loose, and rattles around a little in fighter mode, but that's it for the actual fighter. I did notice some scuffing though, not on the fighter, but on the back boosters. Most noticeably, there's a pretty big gouge out of the bottom of one of the boosters. Fortunately, it's toward the inside, and on the bottom, so it'll never be seen anyway. Aside from that, and a tiny bit of overspray on one intake, this thing is absolutely beautiful. I love the TV hands.. Personally, I think they look much better than the normal ones, and they're all I use. It's funny... I'm so afraid to put any stress on this thing... I must've taken an hour to transform it the first time.

Here's some rear details.. the doors aren't visible in this part, but they're not too hard to figure out.

*Screwed up post, see below*

Here's some landing gear details.... I would've sent these by email, but my email doesn't like attachments sometimes.

K, here's a couple of shots that may help... I should'a known those were placeholders.. no way you'd leave them on a plane that beautiful.

Agreed.. that thing looks beautiful.... Personally, I'd add more detail to the landing gear though. Right now, they look kinda like donuts on pipes. It looks like the rest of the model is based off the 1/60th, so I'm guessing that's where that comes from. For detailed landing gear your best bet is to look at the Hasegawa kit, if you have one. They look about as true to life as you can get. If you need scans of instructions, I'd be glad to help out.

Hehe.. well, there ya go. I thought about getting the Angel Birds version at a hobby shop since it was the only one there, but I held out and got the VF-1J later online.

LOLOLOL.... Imagine the pranks you could pull with that material... I've got a couple of Matrix-fan friends.. just think.. you go in one day, and wallpaper their room with this stuff. :D:D:D Be a great candid camera type of joke. Too bad they didn't have this for making the Movie TRON.. would've saved em a ton in special effects costs.

Also, I think Guld knew it was a suicide mission... it makes sense that he felt guilty for all that had happened. When he finally realized what had happened all those years ago, it seemed to me like he wanted to atone for it, and make sure that Isamu and Myung would both make it out alive. One other thing... Considering that Guld was entirely linked into the YF-21's computers, I doubt he would have had any chance to defeat Sharon. Where Isamu could shatter his viewscreen, and fly by his own sight, Guld depended on the flight computers for EVERYTHING, including vision.. She could have changed what he saw without even bothering to hypnotize him, because all the visual systems were electronic. All she had to do was make the computer think the plane was pointing a different direction than it was, and steer Guld right into the ground. >_<

Here's an idea for you.. Try an Angelbirds VF-1D. No, seriously.... Today, the Blue Angels and Thunderbirds both have a number 7 aircraft, and possibly more. They're used when one of the aircraft is in for repairs, I imagine, cause they can easily repaint the tail numbers to replace another aircraft. But they also serve another purpose: publicity. I have oodles of beautiful photos of both the Blue Angels and Thunderbirds in flight, some from within the cockpit. Now, trust me, you're not going to have a free hand to snap photos when your canopy is a few inches away from smacking into someone's wingtip. That's where the two-seaters come in. The back seater can be there to take photos of the group in flight. They don't usually perform with the group unless another aircraft breaks down, but they probably hang around quite a bit at practices and photo-shoots, taking up-close and personal shots of the planes. I actually have a photo of the Blue Angels from a distance, showing the main group in formation, planes 1-4.. however, in this shot, number 4 is actually a two-seater Hornet! You also often see the extra planes at airshows. Sometimes, they'll leave one aircraft parked as a display for the crowd to look at up close, or it may be parked off in the distance as a flyable backup in case of a problem. At one airshow I've been to, they actually switched aircraft mid-show when one plane had a hydraulic problem. He landed, then a few minutes later, took off in a two seater F-18, and they continued the show. It was actually a better show than usual, cause the soloists did some extra stuff to stall for time while the planes were switched. So, it really makes sense that any flight demonstration team would probably have one or two two-seater planes. Besides, you've gotta have that extra seat to pull the obligatory publicity stunt, and give some contest-winner, or VIP a ride.

Then there's the G-Gundam method of the "trace-suit" which basically has the person wear a weird suit that translates all their movements into mechanical motion.. still falls apart at the idea of how they walk, jump etc... see, if you jump, so does the mech.. but then, how are you jumping, if the floor rises with you? Also, I have yet to see it explained how the walking works.. eventually, you'd run into the cockpit wall... so it's got some sort of omni-directional treadmill floor?? I agree, personally, the matrix-plug style interface is probably the only thing that would give true-to-anime control. Of course, when you think about it, in games, you can control a complex mecha with only a nintento controller... all the calculations are pre-programmed, so all you have to do to walk is press "forward." Maybe, to some extent, the mech is programmed to always balance itself etc, and all you have to do is control which direction it moves in... the AI does the rest. It's pretty unbelievable, yes, but considering they have metal which can change it's own structure on command (like the YF-21's wings in Mac+) it's not too hard to imagine.

Here's a reference pic from DYRL that's from another thread about a CG Valk... DYRL Cockpit Looks like the cockpit had a side-mounted joystick, and a change-o-matic throttle control that would change configuration for different modes. No idea how that would control the thing though.

Actually, that would be rather helpful. I have an Italeri F-14B kit that's beyond strange... they actually did change the back end, and gave the kit a cockpit upgrade.. sort of (the cockpit's kinda bland). But what they did was simply chop off the back end, and added a strange kind of mounting ring that actually mounts the nozzles ahead of the back edge of the stabilizers... very weird. I've never seen an actual plane that looked like this kit.. it seems really unlikely, though, because of the way the stab is mounted.. it looks like the nozzle would be unable to open all the way without hitting it. I'll have to see if I can get a pic of this thing.. it looks like a whole section of fuselage is flat out missing.

Actually, I think the B originally used yet another engine... For a while, they tested it with two of a different type of engine, one that had a nozzle that resembled an F-15 more than an F-16C...most of this comes from model kits though, so it may not match real life.. all I know is that F-16C kits often come with a new nozzle that often is divided up into individual petals that must be glued together. The F-14 D kit came with those nozzles. The F-14B on the other hand, from all reference photos, has nozzles that resemble the nozzles of an F-15C, with the "petals" still attached... these nozzles are more streamlined to the airframe, and in my opinion, actually looked better when fully open than the other nozzles... I'm gonna check an F-14 book, it lists the actual engines used, which have slipped my mind at the moment.. I think one was GE, and the other was Pratt and Whittney...but I don't remember which was which. Edit: Ok, can't find the book.. maybe someone else knows for sure... but I know the F-14 was tested with another type of engine.. something in me wants to say they were modified engines from the B-1 bomber, but that could be my lack of sleep.

LOL.. I made that last night, just to see how it would look if I traced over the instructions. I was able to find my YF-19 instructions, and scan them in... so I figured I'd try and make some line art from them. That pic is just a tracing. I made a transparent layer over the instruction scan, and traced all the details, then saved it to a new image. It was really pretty easy to do, actually. I may do more of them if I can find more high res instruction scans. I'll send the big version to you pronto.

Hehe.. I'm gonna start saving up now... my major's aeronautical engineering, and the upper division courses actually delve into flight testing a bit.. I'm gonna have to see about getting a license before then so I can actually fly stuff when we get the chance. As for presents.. nothing jaw-droppingly amazing, but great stuff none the less. New computer speakers, flash drive, couple of dvds, fun stuff. But I honestly enjoyed buying stuff for other people more this year.. I found some things that my family was really happy to get... especially my dad. They've released the entire first season of the Rocky and Bullwinkle cartoons on dvd, and he's been cracking up all week watching those shows. My self-present should be coming in the mail soon.. bought myself a long promised gift, and got a 1/48 VF-1J with FAST packs.