wmkjr

no es posible
 

2 hours ago, pengbuzz said:

Thanks to you as well; modelbuilding project or another type?

I'm doing a 1/60 repaint but haven't tried something like it before. I only did Xigrid's X-9 and that's about it for my experience though I do have some 1/72 destroid kits in storage. It's fun taking the valks apart and seeing how they designed things though.

Pengbuzz- Who cares what they think, this is your vision and as long as you're happy and enjoying the build then it's all good.

I've started on a project too ( a little nervous as I'm a noob at these) but am enjoying all the little things that hopefully will make it all worth it in the end.

It doesn't fit. 

27 minutes ago, Old Man said:

I was off the boards for a few weeks when this was announced. Where can I preorder this from right now?

The regular one can be ordered through the link above. The premium finish is closed already I believe. I figure I'd mention that if you were looking for a particular one and this thread is for both.

Also, going with Master files the VF-0B has the D head and the VF-0C has the A head.

4 minutes ago, seti88 said:

@wmkjr that's the way to rock, still get the goosebumps watching em again! 

getting the cockpits out must be nervy! 

Not really. 2 screws (or one if you're lazy like me) and it comes out in half. Pop and swap the heads then done. It's going into battroid for the B that is the tricky part.

From the last page:

On 9/4/2015 at 10:04 AM, wmkjr said:

Finally picked up my box and what is the first thing that this big idiot does?

A refresher or for those who didn't see it the 1st time.

Nope. Check the VF-0A/S thread but you can do that too.

To all that are wondering if you could make the B and C variants. The answer is yes and no. Depends on the mode. Fighter and Gerwalk are fine. Battroid will be the hard part as the A's cavity cannot accomodate the D's cockpit fully. You can do a C in Battroid and you can kinda cheat a B in battroid but you can still see a little of the cockpit. Anywho's here some pics for one of my projects in the works. You've seen the fighter modes already.

Trying on something different for a change.

and no that's not the VF-0D.

9 minutes ago, Sandman said:

How do you are yourself?

http://www.macrossworld.com/mwf/topic/33610-who-and-where-in-the-world-are-you-ii-intro-and-location/?page=1

Pretty easy to do with the instructions.  Looking at those pics now  I must try a dual gunpod pose.

http://studio-halfeye.com/himiken_blog/takaken/category/tenku-no-escaflowne/gk-escaflowne/ page 5  top entry starts the info for this project. 1st page is the latest info. This was made to coincide with S.H.E. 20th anniversary and Escaflowne TV series.

59 minutes ago, brannon said:

Hello all , i wonder if i can get a little help? i preodered the draken and dont remember from which site. luckily i used paypal but the vendor shows up as   kevin@circle-soft.com does anyone know which website this is? ive checked all my emails and cant find the confirmation email any help would be appreciated thanks.

 

Loopaza

On 2/20/2017 at 8:58 PM, kajnrig said:

This is more about planes in general, but it does have relevance to VFs.

Why is the cockpit located at the nose? What issues would arise from placing it in the middle or rear of an aircraft?

Given the growing prominence of coffin/camera cockpit systems in VFs, what would preclude a middle- or rear-situated cockpit?

Switching up cockpit placement could lead to some interesting VF designs, at any rate.

I would also be concerned about getting struck by some foward fuselage debris in the event of it taken damage if the cockpit were in the middle or rear.

Hmm cracked on both sides? It's the one on the right in the bottom front correct?

 I think if I put $40 on the side a month until release I can get a safe cushion for 2. In the teaser pic the boosters look a little narrower.

49 minutes ago, no3Ljm said:

Wait. What corrected sticker for the box image? Was there a recall?

 

Not a recall per se just a notice:

Thank you very much for your continued patronage of our products. 

With regard to "1/60 VF - 0 Support Reactive Armor" which was released on February 10, 2017, a mistake in printing was found in the product image on the left side of the product package. 

Regarding this matter, we are very sorry for the circumstances of our company, but we will respond in the form of sending a design sticker that modified the part of the printing mistake. 
Although I am very sorry to trouble you, I would like you to paste this sticker at the customer's own mistake in the print mistake part. 

As for the distribution of this sticker, since it is currently undergoing printing work, we will notify you again on HP as soon as preparation is completed. 
After that, if you can inform us of "Design sticker hope" to our customer, we will ship in order. 

We truly apologized for causing inconvenience to our customers. 
Thank you for your continued patronage and continued patronage.
 

From Arcadia's website http://arcadia.ac/user_data/notice4.php

I wonder if NY is waiting on Arcadia to provide the corrected sticker for the box image hence the delay? Maybe not but I'm still waiting on mine from them too.

Edit: Or maybe Arcadia halted shipments to correct the error 1st.

2 hours ago, no3Ljm said:

Looks nice! 

But is this something that you can attach to the VF's hand to convert it into a 'BFG'? Probably it's going to make the VF-1 or VF-4 looks cool.

 

Hehehe. Just being sarcastic because of the price. But seriously, imagine that attached to a VF-1 GBP.

 

I think a lancer valk with GBP  vs stampede valk showdown is in order.

2 hours ago, derex3592 said:

Glad I bought and built the 3D kit made by a member here about a year or so ago. No way in hell I'd pay that. 

It was close to that price though and it was also resin cast and limited run hence why I'm thinking that's why this one is priced this way. If this was die tooled, it would probably be cheaper though the die molding would cost more and it being non transforming and not offering a lot in accessories/gimmicks, I would not expect to see a return on their investment.  I like the 3 different versions made. This version seems to have longer, flatter engines and the cannons are integrated more.  

3 hours ago, ChaoticYeti said:

Have there been pictures of the actual mold? If so, I missed it.

Not yet. Probably still tweaking the design. Like when the VF-0D was announced.

If it's resin cast, maybe it'll be a limited quantity run because of the certain amount of times they can reuse the molding and that's why it's at that price? 

14 hours ago, seti88 said:

Very clean lines! 

Seventh Moon. I remember them making a YF-29 conversion for the VF-25. They said the conversion kit would be available next WonderFest on their blog. They also had a YF-30 on display.

I remember following that project, it turned out beautiful!