BlueMax

Well, how happy you are with the default markings depends on whether you are viewing it from a Macross fan POV, or a TF fan's. I mean, there are TF fans (who likely only has a vague idea of Macross) who wanted this to be so G1 accurate that they were unhappy with, and questioning, the inclusion of the heatshield when the G1 toy had none.

The "ears" of the head in the silhouette reminds me of BlackWing (Darking/ Hydra)

Oh man... they grossly over estimated the durability of the shipping box....

For the ones who might care about the luminosity of the Booster Tip covers, i've managed to dig out a little UV LED used to cure epoxy resin and I conclude that they do glow under UV: In case of doubt, here is the transparent leg cover as the control: HOWEVER, long time collectors know that UV rays and toy collections absolutely don't go together, ESPECIALLY WHITE PLASTIC based ones. You have been warned.

I'm approaching this from a Macross fan's perspective way more than a TF fan's perspective. This means that this is primarily a VF-1 cosplaying as a TF character. For me this applies even to the original G1 Jetfire. It was always a VF-1 in non canon Macross paint scheme primarily to me. Therefore, I personally have no need for the markings to look EXACTLY like the 1/55 version to me. Would it have been better for it to look like that? Maybe, but I'm perfectly good with what we have. This is good enough. The marginal utility/ returns just isn't worth the marginal effort in achieving the "perfect" G1 look. I'm not letting "perfect" be the enemy of "good enough". Anyway, here it is on a TF CHUGs shelf.

The jolly roger on the heat shield should be comparatively easy: The plastic is molded black and painted on. It should be just a case of using a very mild abrasive or even rubbing alcohol to get rid of it. Tail fins wise probably a little more tricky. It is white paint on red paint on white plastic. If you are having FAST packs on in any mode, visually it should not be an issue. If it really grates on you mentally, then some red stickers trimmed nicely, or gundam paint markers with masking tape, (or a combination of both, should you want the base figure untouched) should do the trick.

Not-Jetfire attempting (unsuccessfully) to be a Robot in Disguise when it is painfully obvious that he is More Than Meets The Eye.

So my standard copy came today, after removing the outer wrapping, this is what the shipping box looks like: Opening the lid reveals: A long retangular box which stores accessories (and stand if you got the deluxe version) and acts as ballast to protect the flap of the main box from damage The box in all its glory: The contents: I haven't got too much of a chance to meddle with it yet, but my initial feelings are: - Feels like Valkyrie Factory quality - Love the BOX! And the color scheme really pops! - Paint quality is acceptable (very mild over-sprays, some what similar to the Yamato 1/48s), but some parts are probably susceptible to paint scrapes. Would probably recommend a clear coat, preferably UV resistant ones. - Plastic finish is a little on the rough side on the underside surfaces, but acceptable. The rough plastic finish / minute flashing may make mounting of the booster backpacks way more difficult when compared to OG Yamato/ Arcadia. - The supposedly luminescent parts are not glow in the dark. They need UV light. Probably. I have no blacklights handy. - Some parts are really tight, to the point that I felt as though if I forced it more, I might cause breakage. I advise a good dose of caution and err on the side of caution, especially when you have no experience with the OGs. If OG Yamato/ Arcadia is tight out of the box because of precision, then this tightness is more because of imprecision. - It is really beautiful, and it is easy to think of it as a Yamato/ Arcadia in Jetfire colors. makes for a super wonderful static display. However, handling it will remind you that it is a Yamato/ Arcadia KO presented as a TF 3rd party product. - Overall I am very satisfied with it despite it being a KO, so much so that I’ve placed a 2nd order, this time the deluxe. The G1 style packaging really does it for me and did I say mention I absolutely dig the colors? I’m not partial to the skull and crossbones, but not a big deal. If it bothers me in future, some Gundam paint markers and masking tape should take care of it. I’ll probably stick an Autobot insignia on the nose cone though.

Yes, from the videos, you need black light to create the effect.

Very nice! Did you agonize about having to cover up the majority of the tampo printing though?

eh.... 1 for each mode on display actually😁

Bummer that this is delayed, but seeing that we are almost at the tail end of Q1, Q3 sounds more likely than the original release date of "End 2023/ early 2024" on the listings on Taobao which has not been updated since. These delays seem par for the course for products of this nature. In fact, besides the VF-1Ss, some of the proposed VFs became vaporware: The CFs, Angel Birds. I just hope that this will actually be released.

Steam now has it listed, but only unlocked in about 7 days https://store.steampowered.com/app/2103230/MACROSS_Shooting_Insight/

Alaska base VF probably easier with Max though. I mean, even if you don't do anything, with time the blue will naturally become green/teal anyways. 😅

I don't have access to my DX armor now, but it could be from one of the micro missle ports. it could also be another random part that was somehow inadvertently dropped into the box in the factory itself. Whatever it is, keep it together with your armor. Who knows, you may find yourself staring at that precise spot missing the part on the toy when you handle the armor in future.