captain america

I hate to break it to you, Ted, but the reason you had to remove a chunk of material from the bottom of the foot is That said, know that I'm paying close attention to your mods with the intention of implementing (most of) them on a future re-issue of the kit.

That's a cool mod. The heel looks like it was pushed a tad rearward while the Walker Cannon foot has a new pivot at the toe and its anchor joint is located higher on the calf. I'd have to see more to know if it hampers the Battle Sniper knee bend.

*HEAVY BREATHING INTENSIFIES*

That's putting it nicely! They managed to take a fantastic Aramaki design and butcher it because they have no sense of aesthetics, to say nothing of the figure's ridiculous child-baring hips! A properly proportioned MOSPEADA rider is completely feasible, and I proved it.

Mold-prep is done and molds are poured. Should be ready to go early next week.IMG_1952.HEICIMG_1951.HEIC

Nice publicity pic, but in reality, I doubt you'll ever see the Superhornet carrying more than two of these at a time in anything other than full-on war. It might be able to take-off with that loading, but it sure can't land with it, especially on a carrier at sea with a pitching deck.

Hi Ted. I see you relied more on the technical schematics than the 3/4 view beauty shots. I originally did that with my 1/72 Destroids, but went the other way for the 1/48 Tomahawk and IMHO came away with a more aesthetically pleasing result. Might be worth considering.

Can this come back for a limited time? I already have 7 requests.

Maybe blue is better?

No worries, might as well leave them up. That way people have the JPG option if HEICs are troublesome.

Hey Shawn! Thanks for the kind words, it's still a work in progress. I actually think it's not a bad thing with the HEIC images not loading, since the instructions need to be downloaded anyway. It's actually wonderful that all the instruction plates can be crammed into one message with this format, as opposed to having to post 5 different times to upload them all in JPG.

The destructions are ready!! 55 HANDS.HEIC54.HEIC53.HEIC52.HEIC51.HEIC50.HEIC49A.HEIC48.HEIC47.HEIC46.HEIC45.HEIC44.HEIC43.HEIC42.HEIC41.HEIC40.HEIC39.HEIC38.HEIC37.HEIC36.HEIC35.HEIC34A.HEIC33.HEIC32.HEIC31.HEIC30.HEIC29.HEIC28.HEIC27A.HEIC26.HEIC25.HEIC24A.HEIC23.HEIC22.HEIC21.HEIC20.HEIC19.HEIC18.HEIC17.HEIC16.HEIC15.HEIC14.HEIC13.HEIC12.HEIC11.HEIC10.HEIC09.HEIC08.HEIC07.HEIC06.HEIC05.HEIC04.HEIC03.HEIC01.HEIC

What could have been.

Hey all! For those who are part of the second run, the kits are ready, I'm just waiting on the aftermarket hands to arrive from Asia, which should be in about 2 weeks. Instructions will be ready by late next week, but in the meantime, enjoy these extra beauty shots!

Discontinued, but I did make a glow-in-the-dark dash panel along with my update set.

Hey guys, guess what? Batch 1 kits are already shipping! I received the figures from Carlos a few days ago and have been getting kits prepped to go out. I think I can have all of batch 1 expedited by tomorrow evening. Also, some pics of Gerwalk mode! FYI, it balances exceedingly well, and what you see here is just holding together using hot glue; no floppy mess like with other offerings! IMG_1664.HEIC IMG_1667.HEIC IMG_1670.HEIC IMG_1673.HEIC IMG_1678.HEIC

Looking good, Ted! On my end, I've caught-up to all current orders. Literally just waiting on the pilot figures to arrive.

Hello all! Casting of the 1/48 Tanku-Robo kits (batch 1) is almost complete, but I'm still waiting on the 3D printed pilot figues/seats. This is the only thing preventing me from shipping. Please forgive me for this delay.

Hey @everyone This is just me giving you guys a progress update on the 1/48 TANKU-ROBO kits: production is already underway, with the 9 first full kits and 10 partial kits are cast. My resin shipment is backordered, so I'm casting up all the flexible elbow parts while I wait. With that said, the first kits will start shipping in about 10 days!IMG_1422.HEICIMG_1421.HEIC

To be fair, there are other offerings on the market. These two, for example. And then there was this thing, which may have been a one-off: So I stand by what I said: The very best you can get!

The very best you can get!

Hood gap: I added a plate to the opening which can be removed for robot mode. IRL the panel would simply retract into the hood. Shoulder: as stated above, the chest (and all abdomen parts) are masters and I didn't want to press the shoulder joint in for fear of damaging it: it's holding with friction only in the pic, and when glued properly, will be more than sturdy enough. Hands: these are aftermarket posable hands which are included in the kit, and the tab in the palm is made to fit the slot in the handle of the rifle. I would have liked round hands, but I couldn't find a vendor who supplies them. Also, shipping payments are due!

Here it is: the 1/48 TANKU-ROBO in all its glory! Please forgive the gappy abdomen and stiff posing: I'm using a mix of cast parts and freshly primed master-patterns which fit very tightly and I don't want to damage them. I did not attempt a full "Walker Cannon" mode for the same reason, but it is fully feasible! FYI: the gaps in the elbows are because the flexible covers are still being cast, and I'm still waiting on the pilot figure/seat to be delivered. I will posting the shipping fee details on Friday and re-opening the orders for batch II early next week, so keep a very close eye on this page so you don't miss out on this once-in-a-lifetime 20th Anniversary kit! IMG_1260.HEIC IMG_1262.HEIC IMG_1263 copy.HEIC IMG_1264 copy.HEIC IMG_1265 copy.HEIC IMG_1268 copy.HEIC IMG_1269 copy.HEIC IMG_1271 copy.HEIC IMG_1272 copy.HEIC IMG_1273 copy.HEIC IMG_1275 copy.HEIC IMG_1277 copy.HEIC IMG_1278 copy.HEIC IMG_1279 copy.HEIC IMG_1280 copy.HEIC

Captain's Log: Friday, June 14th. Just a quick update today: I have successfully cast all the parts requiring duplication (arms, lower legs, feet, etc.) and while I was very close to showing a fully symmetrical model today, it was a bit too tight on time, so I will push that to next Friday. In the meantime, I have made some detail tweaks which you will see then. Will the model be able to hold the rifle with both hands: most likely yes, and that will be shown. Support autocannon missing tips: this is by design, as very thin barrels will not cast properly, so only 2 of the 3 barrel stages are present. I will leave it to the OCD modelers to add the final tiny segments in styrene. The front portion of the rifle has been tapered to match the line-art; will show this with the extended barrel. As for the rifle and making it sit more sunken into the hood, this would require the addition of a channel in the hood which would ruin the look of the latter. Lack of forethought in the original design means the best option for a physical model (IMO) is to have the rifle sit slightly higher. This also makes the inclination of the rifle slightly adjustable, giving it more usability in hover mode. 76.HEIC 77.HEIC 78.HEIC

Captain's log: Friday, June 7th, 2024. Closing stages of construction have arrived. I made a few alterations to some of the parts to make them more conformal to the source material, and am now at the priming stage, getting ready to mold all the parts which require duplication. The first is the foot armor cover thingamabob, which you can see in pics 68 and 69. Admittedly, the pieces you saw last week were place-holders, but now I have a far better solution which looks right! That was a bit of a sticking point for me, because the clearances in the lower leg/foot area are very tight. The lateral armor pieces are separate (held with tack putty!) which will be needed to avoid binding the foot in robot mode. Pics 70 and 71 show the deployed main gun and support autocannon. The kit will also include plugs to reproduce these in retracted mode inside the arm nacelles. Pic 72 shows the rifle unit in hovercraft (stowage) mode with the raised stock and retracted barrel, but will have the optional long (extended) barrel and lowered stock. Pics 73-75 shows the hood fairing, now sloped down as per the line-art. I did like the previous version with the squared nose, but apparently it was really bad for gas mileage!! With these mods done, I can now begin mold-prep for the duplicate parts as I await the arrival of the pilot figure from Carlos. If the castings aren't ready by next week, (which is doubtful) I may simply skip an update, though the odds are pretty good that I'll be able to show a fully finished figure in the next 7-10 days, so stay tuned!! 67B.HEIC 68.HEIC 69.HEIC 70.HEIC 71.HEIC 72.HEIC 73.HEIC 74.HEIC 75.HEIC