Rohby

Nicely Done Fulcy! Sorry about the warped laser. Must have gone through some intense heat on it's route to your place. Also, the original head lasers do have a seem line which is why I followed that seem line on my molds. Also, if you take a look at the original lasers from the top view you can see that they aren't perfectly round at the tip. It's slightly on the oval side but the tip's so small that it still seems round.

Hey guys, here's some more pics of it attached to the body:

Hey All, thanks for the support! I'll be starting the cast next week and I've already contacted those that sent me a PM and will finish contacting everyone else that has posted a request by today. The prices for the recast 1S heads are as follow: Pricing for recast 1S Heads: 1 qty = $11.00 2 or more = $10.00 each Free shipping within the USA.

Hey All, finally got around to casting these 1/48 1S heads. I've managed to cast them in all it's pieces thanks to EXO for dismantling his original x 2. I've also managed to match the green visor. Very hard to tell the difference from the original green. Anyhow here's some pics. I plan to only cast one batch of these so quantities per person may be limited. Also, the two halves will need to be glued back together once assembled. No painting is necessary, I've tried my best to match the original color. We'll except for the antennas which shouldn't be too hard to paint. Some will be perfectly matched and others will be one or two shades off but nothing drastic. I'll also inlclude the screws and the pin as well.

I forgot to mention, I'll be offering free shipping within the US. Just send me a PM if you're interested or you can post it here as well. For those of you who've already sent me a PM, I'll be getting back to you ASAP. Thanks again

And here's the pic to the second option. I'll take another pic of it next to the original for comparison tomorrow. Also, the holes on this piece hasn't been drilled but the one at the top has.

Hey All, hopefully it's not too late but here's a recast for the 1/48 BP8. I have two options to choose from: 1. super hard resin, however I'm unable to match it's color to the original piece. Good for customs. Pics are at next posts. $7.00 pre-drilled 2. I was able to come close and sometimes I was even able to match the color of the original to the exact. However, this material is not as hard as the first but is slightly flexible. Still strong enough for the job. $5.00 pre-drilled The choice is your's. It all depends on what you plan to do with the piece. If you're gonna go for a custom, just go for the super hard one since you'll have to paint it anyways. If you need the piece to replace a broken one and have no intention for painting, just go for the second one. I've sent both types to "Neova" and maybe he can give us some feedback on both pieces. Reason why the first one is more expensive: simply because the material costs alot more and it's cure time is over 1 hour. Four times the length as the second one which will hog up mold time. The pic above has the super strong resin piece (left) and the original piece (right)

I dono if I'm too late on this but I have some BP8 recasts to offer. I'll post some pics and details later on in the day.

Last one....

Another....

I was cleaning out my desk and found my sketch book with some SD VF sketches I did about a year ago. Thought they'd be funny to share

LePouser, no need to sign up here on the thread. Just send a PM to me if you're interested

Also, the arms need to be glued on since I had to decapitate the original's arms in order to cast it correctly.

Just send me a PM if you're interested.

Sorry for the delay, I believe I was supposed to have these finished a while back. Anyhow, here's 3 poor quality photos

I'll gladly send a set your way, bigkid24 Just pm me or address again. Oh and uh... Eternal_D's got your tab on this one

Sorry, forgot the pricing: it'll be 10 bucks for the full set free shipping: 8 single missiles 16 double missiles X 2

Sorry for the delay on this. I finally got to it. Just send a PM to me if you're interested. Here's a photo of the missles. Keep in mind it's only half of them since there's a set for the left and right Fast packs. In other words, you'll get x2 of what you see below for a full set.

Strike cannon would be nice. But I'll need one that's 100% dismantled. Some of the parts on the cannon is actually glued down.

The second pic looks like an original but it's not, I tinted the recast a blue-ish color and the second photo I took out the flash on the digicam since the first photo came out too bright. But ofcourse the second photo ended up too dark Anyhow, just send me a pm if you're interested.

Here's another pic:

Hello All, I recently recasted these 1/48 1J arm armors for a fellow MW member so he can do a custom with the recasts instead of the originals. I now have molds for them and can offer them for those who are interested. Here's a couple of photos of the recasts. Forgive me for the horrible photo quality I borrowed my sister's digicam and didn't know how to mess with the resolution.

I think I'll tackle this one for everyone. I'll see what happens next week after I meet up with exo first though.

There's no point in trying to get him to lower his car more. I tried all day and it didn't fade him one bit

Just about finished with these hands. Thanks for the support guys! Still owe a few orders that has already been paid. They'll be out shortly. And I'm also waiting on the following members that has placed an order. So if you're listed below, if you can please check your PM's real quick. blackjek rnurmin Sundown goldenboy_forever Stormrider GianS Uxi Reaper 9000 Wolfpak54