Jump to content

David Hingtgen

Moderator
 View Profile  See their activity

  • Posts

    17022

  • Joined

  • Last visited

 Content Type 

Everything posted by David Hingtgen

  1. David Hingtgen
    Unless that ship has a huge role in future eps, and the model's already ready.
  2. David Hingtgen
    Chronocidal pointed out the pre-262 has a T-tail like an F-104. Combined with its intake cones and wingtip pods, it's very F-104-ish.
  3. David Hingtgen
    Now I'm waiting/hoping for a silver repaint. Presumed mid-season upgrade? PS----OMG, it IS an F-104! (In valk form).
  4. David Hingtgen
    Then Milia will come out of retirement, get a red VF-31, and seek revenge.
  5. David Hingtgen
    Cheap F-18 in stock: http://hlj.com/product/HSGD10/Air (but the gear is molded in dark blue--harder to paint a light color). Just as cheap and molded in grey: http://hlj.com/product/HSGD8/Air Out of stock, but I bet they can get it in MUCH quicker than they say---that is a perennial kit that is constantly re-issued. Or just check a local hobby shop---every 1/72 Hasegawa F-18 will have the same landing gear, the only reason some cost $10 and some cost $40, are the decals. Buy whatever one's on clearance/sale. For people in the US---check Hobby Lobby and Michael's---with their perpetual 40-50% off a single item coupons, you may be able to snag a Revell F-18 REALLY cheap. And the gear will be just as good. If you're lucky, you may find an Academy F-18.
  6. David Hingtgen
    Hmmmmn. Proto-Flanker: Note main gear doors/airbrakes.
  7. David Hingtgen
    Minor update---I don't plan to paint very much (would defeat the point!) but I greatly disagreed with their cockpit colors (it was fine for an F-15...) So, bits before painting: (quarter for scale) and after: (some parts were painted "on the other side"---but I'm not going to reposition all the parts that fell over while photographing) This is 1/144, with a closed canopy (that's not especially clear). So I'm not too concerned about painting nicely. I just don't want "black and grey" where it should be blueish. (modern Flankers are not "Soviet cockpit blue-green" inside, they are blue-grey---I read that RLM 76 is close, and it looked about right, so that's what I used)
  8. David Hingtgen
    The toon model seems more YUH-61 than anything. But the toy and toon are very different.
  9. David Hingtgen
    I think I had my -25 sets for nearly two years before I got my -25 to put them on! Saved a lot of money in the end though.
  10. David Hingtgen
    Psst----G1 Vortex was a rescue chopper.
  11. David Hingtgen
    I want one mainly to have a working model of a cascade-style reverser.
  12. David Hingtgen
    The same company that showed this when asking for VF-0D preorders? I'd have been ok with the minimal markings if it had actually released in "slate blue with pale grey undersides". But that pic's not even close to what we actually got.
  13. David Hingtgen
    Do they deal with being applied to matte surfaces better than traditional water slides? This kit's sheet says printed in China---not a good sign in my decaling experience.
  14. David Hingtgen
    Tiny pegs or clips on the edge, would be far less noticeable than half the coat of arms missing like it is now.
  15. David Hingtgen
    Seconded. Never heard of ASU DECA.
  16. David Hingtgen
    My Smart Robin is the result of cancelling my Mania King order. I came very close to getting the later correct colors Mania King, but never did.
  17. David Hingtgen
    YF-23 gear is even better I think, but much harder to find. (I remember when those kits were cheap and everywhere) Also, if you don't need metal, you can buy a whole Hasegawa F-18 kit for less than the metal gear costs.
  18. David Hingtgen
    Ok, so they made a hinge for the left half of the tailfin/shield, and a second set of hinges for the right half?!? One single hinge down the middle would have looked a lot better, than the zig-zag they have now. Seriously, I've seen much smaller hinges doing the exact same thing, on other transforming figures etc. Why'd Bandai do the worst-looking possible solution? "Splitting in half down the middle" isn't some complicated new thing they have to figure out, I expect better.
  19. David Hingtgen
    This goes for both posts! There's no modex number printed on, but there's a small sheet of waterslides. All other markings are printed.
  20. David Hingtgen
    I noticed the Deadfish release of Ep 4 seemed lower quality (more pixelated) than earlier eps. Like they dropped the video bitrate or something. Most noticeble when there's lots of "sparklies" (or missiles!) on screen.
  21. David Hingtgen
    True, but I find them easier to accept than UUUU's weird paw-thumbs.
  22. David Hingtgen
    So it seems few people like the Anubis-head? I love it. Though I also seem to be one of the few who likes the head on Messer's -31.
  23. David Hingtgen
    13 or 4? I'm tempted to do 4, but 13 is so much better-known.
  24. David Hingtgen
    I had FP NotWeirdWolf on pre-order, but cancelled it. Snout is ridiculously long, and the colors are all wrong----which is strange, as FP/MT has the best paint and color matching of ANY toy company. Hasbro's has perfect colors (wish their Triggerhappy did) and a much better wolf head.
  25. David Hingtgen
    Ok, just a quick overview from last night (it's hard to take good pics at night under CFL's): I tried to give an impression of the paint job and the many small markings tampo'd on. A single piece of one of the intakes has more printing than my entire Arcadia -19 I think... Bottom pic, note the tailfins have each RWR/light painted---white, red, silver.
×
×
  • Create New...