Xigfrid

Something jumped to my eyes from your last batch of pics: Why did you added the pylons to the drone wings if the HMM form the 19 already have them? Are you going to print the missiles without the pylons?

That was a tough decision. The pylons are part of the general design, and you can clear identify the drone fighter by the "Y" shape of the extremity of its wings. But you also see the drone a lot of time without its missiles but with the pylons empty. So I made the choice of including the pylons into the design.

At first I was thinking to offer 2 set of wings, one with the pegs to attach HMMs and one without. But after testing the YF-19 HMMs, they fit nicely I think.

Anyway, they can be removed from their pylons and I also can make a smaller/invisible attachment later in Shapeways that would attach to the Drone wing and grab the HMMs like the original pylon.

If you plan to order Kurisama's HMMs, you can also ask him to make the pylon smaller directly.

Do we have a count yet of how close we are to 20 in 1/60?

I am still waiting for confirmations, but so far we got 13x pre-orders in 1/60 scale and 8x in 1/72 scale. I am discussing with Jasonc if we can manage fewer pre-orders if both 1/60 and 1/72 scales are made.

I might be in for a 1/60 if it helps get the X-9 project completed.

It can definitely help the drone fighter project! I am not sure it would speed up the X-9 though! It is your call.

I tried first spray, but I did have some bubbles forming so I stopped and I am now waiting for it to completely dry. I will put a second layer after sanding!

I think I saw Ikaru made by EXO, but I don't know if he makes him on demand.

But recently I came across "Priser" figures, they are extremely detailed and you also have a lot of choice of painted ones. Their 1/72 scale is very similar to the 1/60 figures included in the toys and if you are not afraid to put some details up, they could look like Misa/Claudia

You also got the VF-25 gun attachment replacement part!

The replacement part can be purchased here: http://shpws.me/DdqO

Is the Ghost X9 project still,in the works as well???

I have low spare time until end of August, so the X-9 is progressing very slowly.

Thanks! I will update soon and update first post with the list of the confirm pre-orders.

We still don't have 20 for a scale, but not that far

Nice diorama Jvmacross, I am still looking for these HobbyMaster kits in Europe, they are rare and hard to find!

Wow, nice drone. What is that from?

This is the training drone from Macross Plus. What you see is the early prototype and this drone is going to be resin casted as a complete assembling kit as soon as we gather 20 pre-orders!

More info here: http://www.macrossworld.com/mwf/index.php?showtopic=42404&page=1

I don't remember if I said it, but I'm in for one kit in 1/72.

But just in case that we don't reach the 20 orders, does exist any chance to 3D print it (Chapeways?)? how much it would be?

First post updated!

Great and thank you charger69!

I don't remember if I said it, but I'm in for one kit in 1/72.

But just in case that we don't reach the 20 orders, does exist any chance to 3D print it (Chapeways?)? how much it would be?

I will make this model available at Shapeways if we don't get enough orders. But WSF plastic requires a lot of time and work to sand/polish. The resin kit, on the other hand, would be almost perfect out of the box and only little painting / sticking would be required for assembly.

Thanks, guys, for the input!

I think I may try going with the styrene idea and take the discount. The styrene may be the easiest route for me. I've got no knowledge or skill with how to make stuff for Shapeways. I toyed with the idea of epoxy putty, but that stuff is really hard for me to shape or use. I just don't think I could make it look right.

I am sorry for you, I don't have this VF-19, but if you can take measurements of the antenna I can make a replacement.

In WSF or even steel so that it won't break again!!

To clarify, is that 20 orders, total? Or 20 in each scale?

To pay the injection molds, we need 20 pre order. As each scale need its own set of molds, this is 20 in each scale unfortunately

Hi guys, thank you for the kind words! Sorry, the pre-order details are there: http://www.macrossworld.com/mwf/index.php?showtopic=42404&page=4#entry1205067

I will ask charger69 to change the first page accordingly to the pre-order details and status. We need 20 pre-orders to launch the production. So far, we have around 11 pre-orders in 1/60 and 4 in 1/72. Please confirm to me the quantity and the scale you want (and if painting job by Jasonc is wanted)

Really basic hand sanding / can primer with the harsh WSF plastic from Shapeways. This drone is having its 4th primer layer, and looking pretty good so far!

I plan to apply 2 coat of Tamyia can paint, then glossy finish TS-13 gloss pray from Tamyia. Any recommendation for the glossy finish ?

I agree, improve what really needs improving or get on with new stuff.

I would also be in for the VF-1S Moon Guard repaint /w armor

I can see a new VF-1D with revised / longer canopy in the immediate future! Instant buy

Is there an option to have this painted and assembled?

For an additional $35 you get a painted version, let Jasonc confirm if you can get it also assembled.

Personally, I can see it easy to be partially assembled so that you just have to snap in 3 parts at home and reduce shipping cost / box size.

Edited: it is $30 to add instead of the $35 mentioned, so sweeter!

Pass.

Depends if this is a V3 or not!

The prototype is getting its 3rd layer of primer, it requires a little sanding again then the last primer layer before painting!

Remember that this prototype was printed in WSF, which is very hard and difficult to prep/sand. The resin kit will be cast from another prototype printed in higher resolution and in resin, which will have a far superior finition for casting!

Is Kicker aware of this project? He might be interested?

He isn't in the 7 pre-orders I registred as of today!

I don't know if it is the right place to advertise this resin kit, but since it requires assembling and painting it probably is!

Jasonc is making a resin kit of the drone fighter designed by myself as seen in Macross Plus movies and on the line art.
Because we need a minimum quantity of 20 orders in one scale to manufacture the kit, we are collecting pre-orders now. If you want to secure one or just want to learn more about this kit, the thread is there: http://www.macrossworld.com/mwf/index.php?showtopic=42404&p=1205067

Very interested in a resin 1/72 scale kit. Shipping to Japan OK?

To anywhere usps handles shipping, that includes Japan

Thank you for the support charger, I have also asked for one painted drone! They gonna be really nice!

In for a 1/60!

Late edit: What is the print filament used? ABS/ PLA or some other type? The reason I ask is if it's ABS, maybe you can try the acetone vapor method to smooth it out. Or how about XTC-3d coating for PLA? One or two layers of this stuff should do the trick.

The printer would be a very high definition stereo lithography resin based. The result is as neat as FUD material from shapeways but being much much easier to sand and to work for molding.

Filament based printers would require even more prep/sanding work that WSF from shapeways!

In the mean time, sanding is going really well too!

A few close shots:

Hi guys,

Everything has been running well, and now I must know how many of the resin kits would be needed. so I will take pre-orders for the following kits that would be made in the USA by Jasonc (from this forum), so the shipping cost to continental US would stay low. Price is fixed to both scale to $85 USD. It will be required an immediate payment of $50 USD to secure a kit, the rest: $35 + shipping will be asked when the kit will be ready.

- Drone Fighter in resin of 15 parts to be assembled and painted. You need to specify the desired scale between 1/60 and 1/72.

- We need a minimum of 20 kits in pre-order to launch a production in one scale, if this number is not reached, we will have to adjust the price if possible.

- Most of the kit will be casted in the orange/tomato colored resin so very little painting would be needed

- Jasonc is offering a painting service for an additional $30.

- Mimics: Camera rotation has been removed, the Laser canon can slide as described previously, the hanging lever rotates and can be deployed.

- A basic decalc sheet is planned and would be added to the kit.

- The stand adapter is not included, but you can ask for it or order it directly from Shapeways for $5, or just use what you want to display it!

I may forget a few details, but the main description is there, and nothing is definitive until we ask for pre-payments. So just tell us what you want and in which quantity of each kit!

Spanner you almost read my mind, I was designing Isamu's Bike last week and said to myself that I could just design the inner parts I have pictured a few pages at the beginning of this thread and replace all the messy metal bars from Arcadia