Jump to content

Jung

Members
  • Posts

    381
  • Joined

  • Last visited

Everything posted by Jung

  1. asdf
  2. asdf
  3. Battroid - imo best mode to show off the MG scheme
  4. asdf
  5. asd
  6. gerwalk
  7. bored with the usual white pilot, so I decided to paint it blue. I should've used a lighter blue though, this blue makes the pilot stand out too much..ohwell
  8. asdfd
  9. asdf
  10. asdf
  11. asdf
  12. Here's my custom 1/48 Minmay Guard "Paris Act". Thanks to Devin for providing this great decal set! Used a very dark grey basecoat this time, instead of the typical flat black, with flat white as the main colour. I decided to mask some areas (tail fins, blue trim on the wings, blue highlights on the leg, and the blue trim on the arms) rather than use the decals provided. Decaling all those large decals took a lot time and patience. Probably went through half a bottle of decal softener capturing the details underneath. I sealed the seams in the legs, arms, gunpod,head and nosecone. Damn nosecone seams splits though. It was either the force needed to remove the legs from battroid mode, or removeing the front landing gear....grrrrrrrrrrr. (sequence were battroid - gerwalk than fighter when I took the photos, you can see the sealed nosecone seams in the earlier modes) Graham feel free to add these pics to the customs gallery. This custom is already sold.
  13. A less conventional method for clear paints is to add a bit to regular opague paints, this gives it a glowing effect. I know famous Japanese modeller Max Watanabe adds some clear blue to his flat white.
  14. I use talcum powder
  15. -"thinner" usually refers to paint thinner/varsol/turpentine, you're correct that this is strong stuff, and should be used minimally and carefully. First try rubbing alchohol or windex first to see if that removes the gundam marker. If you penned it recently the alchohol or windex should work. -yep just unscrew it from the neck mount -again avoid the "thinner", if you want an easy method that looks good, get yourself a bottle of acrylic paint (black, brown, grey etc..). Thin this to a ratio of around 1:1 wtih rubbing alchohol or windex. Brush this onto the panel lines or recesses, (works great inside the landing gear compartments). You don't need to be careful, you can "overpaint". Let this dry for (hour or overnight). Than use rags or q-tips soaked with some rubbing alchohol or windex and wipe. Wipe in the direction as if the plane were flying through the air.
  16. looking incredible as usual, looking forward to the finished masterpiece!
  17. I'll add to the list. -Mini Files + steal brush - I use these a lot, great for sanding especially difficult to reach areas, use the steal brush to clean the files. -Future floor polish(acrylic) - great/cheap gloss clear coat. Spray this through your air brush unthinned, glossy clear coat before applying decals. Dip your canopy, or other clear parts, to make it super clear. I've also added food colouring for painting clear parts (ex. visors, lights etc.). Add tamiya acrylic flat base (9:1, Future: flat base) for a semi-gloss finish. -Decal setting and solvent/softing solution - used for waterslide decals, setting solution helps adhesion. The solvent/softing solution will soft the decals, this allows it to capture conform to the shape of curves and details (ex. panel lines) underneath. If you're planning on the MG custom, you definitely need to use some softening solution. I'm using testors brand (only brand available at my local hobby shop), but I hear Microset and Microsol are best. -liquid mask - makes life easier to mask curves but you can live without it.
  18. beautiful customs, I love your photos!
  19. That looks great! You blended the MG decals onto the fast packs very nicely
  20. Awesome! the white showing on the folded edges looks like drybrushing
  21. I own a dremel, and I've only used the 1 and 2 speed setting, mainly just the 1. THe higher speeds (up to 5) are too scary for me It saves some time with rough work (cutting, drilling, rough sanding etc..) but impossible to use for any fine, detail work. So IMO if you're gonna use it mainly for model work, than rpms and torque isn't really important. If there's a big price difference I would go with the cheaper one, otherwise I would get the dremel cuz of their reputation.
  22. what is "AA"? super glue? If it's fogging caused by superglue, I've read ppl wipeing it off using ammonia. Windex should work aswell since it's ammonia based. You can also just dip it in Future which will clear the fogging and make it really clear. This all assuming "AA" is superglue
  23. Excellent job on your tv max 1a! Your canopy seems quite foggy though, are you familiar with Future floor polish , or whatever it's called in Asia, Singapore members should be able to tell you. Dip your canopy in the Future and it'll clear right up
  24. Jung

    custom 1/48 CF + FP

    1024x768
  25. Jung

    custom 1/48 CF + FP

    My Next projects are Minmay guard Paris act and the 2 blue roses camo schemes. For those interested in commissioning me, please pm me. thanks
×
×
  • Create New...